Description:

*Free standard shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

The Piper J-3 Cub 120 is very well known. This is a time tested model that have proven to be great for flyers at any skill level. It does not matter what flying skill level you are at - Anyone can fly this plane, and even in windy conditions! If you want to do some aerobatic flying but are not the greatest at landings- then this is the plane for you! The Piper cub has some great details and looks great in the air.

Video:

Key Features:

• 2815A-1100kv outrunner brushless power system
• 30A Brushless ESC with Switch-Mode BEC
• Durable and lightweight EPO construction with many surface details
• Easy take off: effortlessly depart from the ground or your hand.
• Easy to construct with pre-installed electronics (motors, servos and speed controllers)
• Strong wing designed for smooth airflow providing exceptional stability, and great ease to control and fly even in wind conditions

Specifications:

SCORPION SII-4025-330KV - .90-.110 GLOW EQUIVALENT (6-8S) - (8-15LBS , 2700W)

Overview

The Tomcat G30cc Motor For 30cc gas airplane This is a high-end motor combines ultra-high power and super efficient design to deliver outstanding performance.

Specifications

• Type:......................... TC-G-6432-KV200(G30CC)
• KV(rpms per volt):... 200
• No load current: ....... 2.2 A @10V
• Resistance:................ 0.04 ohms
• Watts:........................ up to 3000
• Continuous Current:... 65A
• Max Burst Current:.... 80A,10seconds
• Cells:......................... 10 S Li-Po
• Recommended Props: 20x12 to 22x11
• Slots,Poles:............... 24,20
• Diameter:.................. 64 mm
• Shaft: Diameter:........ 10 mm
• Weight:...................... 680 g
• Brushless ESC:......... 100A

1 Meter Balsa Wood Sheets  (1-10mm Thick)

Please contact us for information on if your plane is using Ultracote, or TruCote before ordering if you are unsure

Description:
TruCote covering is a high tech polyester covering that is sensative to heat which makes it easy to apply to your plane. It offers high adhesion, fuel proof/waterproof covering for your plane. Easy to apply using a heat gun and/or iron.

• Specs:
• Width: 23.5”
• Temp to adhesion: Approximately 250 degrees F
• Shrinkage begins: Approximately 275 degrees F
• Maximum recommended temp: Approximately 300 degrees F

For instructions on how to apply covering here is a helpful tutorial:

http://www.rc-airplane-advisor.com/heat-shrink-covering.html


Sold in 1 Foot Sections. Please select how many feet you want.

Please put what plane this is for at checkout so that we can match it!