Fieseler Fi 156 Storch 1600mm Wingspan Blasa Wood Laser Cut Warbird RC Airplane KIT

Contact UsCustomer Reviews
  0  
  4. Fieseler Fi 156 Storch 1600mm Wingspan Blasa Wood Laser Cut Warbird RC Airplane KIT
It is that time year with RC Events--Redwing RC Office will be closed 20-24 Apr. Orders can still be accepted during these times and will be processed in the order received. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you when we return.
more offers

Fieseler Fi 156 Storch 1600mm Wingspan Blasa Wood Laser Cut Warbird RC Airplane KIT

Ask a question about this product
Printable version

Share

Options

Our Price:

$159.99
Optional Versions
Quantity (8)

Details

Availability 8 in stock
Weight 5.00 lbs
SKU DW-S2101

Fieseler Fi 156 Storch 1600mm Wingspan Blasa Wood Laser Cut Warbird RC Airplane KIT

The Fi-156 was created as a reconnaissance, liaison and air-ambulance aircraft in 1936 by Dr. Gerhard Fieseler. This unique airplane’s legs, struts and windows stuck out everywhere, and its landing gear hung down, looking very much like a long-legged, big-winged bird,so it was given the nickname “Storch” (the German word for stork).

Virtually nothing about a Storch is streamlined. It was a purpose-built, short takeoff and landing (STOL) aircraft which, with a bit of headwind, could become airborne in less than 200 feet, and when its low landing speed was combined with a strong headwind, the Storch appeared to land vertically, and sometimes looked like it was flying backwards.

This kit is an updated version of an earlier version. The improvements over the original are improved undercarriage and strut attachments, improved pushrod system, 3 layer tailplane construction for added strength, and improved scale detail. This model captures the very essence of the Fieseler Fi 156 Storch with its solid yet lightweight framework structure as per the full-size aircraft but is built from balsa and hardwoods and includes a molded plastic cowl and rear screen. Also supplied are a pair of scale aircraft wheels, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes nuts, bolts, control horns, rods, and connectors, etc.

The Fieseler Storch has been designed to use a 28mm brushless outrunner motor with 300~400 watts of power or it can be modified to take an equivalent nitro engine. The leading edge slats can be fixed for a simpler set up or they can be working with a servo on each. The flaps also could be fixed for a simpler set up but this model comes into its own with working flaps. So if you have working slats and flaps plus the ailerons you will require 6 x 9~10g micro servos for the wings then 2 x 9~10g or similar for the rudder and elevator.

Overall this is a fantastic kit and due to its ease of construction, it is perfect for the seasoned builder or those with limited building experience. Once finished in an authentic color scheme, and with the addition of scale accessories such as a pilot and instrument panel, this scale looking Fieseler Storch will look the part and turn heads when performing low, slow passes and STOL take-offs and landings at your local flying field.

Features:

  • Laser cut parts for accuracy and ease of construction
  • Carbon spars and wing tubes
  • Molded plastic cowl and rear screen
  • Scale looking and functional landing gear
  • Authentic working slats and flaps
  • Comprehensive hardware pack

Specifications:

  • Wingspan: 1600mm (63")
  • Fuselage Length: 1000mm (40")
  • Flying Weight: 1.6~1.8Kg approx (will depend on power train chosen)
  • Motor: 2836~2840 (300~400 watt) brushless outrunner motor or nitro equivalent
  • ESC: 30~50A suitable for up to 4S Lipo battery
  • Propeller: 10" or larger depending on power train chosen
  • Battery: 2200~2800mah 3~4S Lipo battery


Recommended Parts:
Motor: 2814-2820 KV800-1000
Propeller: 10-12 Inch propeller
ESC: 40A
Servo: 9g *8, (See all RedwingRC Servos)
Battery: 4S 14.8V 2200mAh-2800mAh, (see all RedwingRC batteries/chargers)
Radio: Min 6ch Transmitter and Receiver

Note:
KIT version does not included any electronic device.
Glue is not included.

English Manual, Click Here

Optional Versions Include (make selection with drop down above):

S2101=Balsa KIT only
S2101B=KIT+6M Flim (4M Green+2M Silver）
S2104=KIT+Motor(2817 900KV)+ESC(40A ZTW+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*8)
S2104B=KIT+Motor+ESC+Servo+6M Film 

$20 Flat Shipping lower 48 US only--contact us at [email protected] to calculate international shipping cost








 











: *
: *
: *
 
Bob Smith Industries Insta-Cure Super Thin CA

Bob Smith Industries Insta-Cure Super Thin CA

Untitled Document

Description:

Bob Smith Industries CA Glue

Insta-Cure™

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

Works Best On:

  • Balsa Wood
  • Ceramics

Works Good On:

  • Soft Wood
  • Fiberglass
  • Hard Plastics
  • Water-Resistant
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

 

 

 

BSI-CA-

$4.99

Bob Smith Industries Insta-Cure+ Gap Filling CA

Bob Smith Industries Insta-Cure+ Gap Filling CA

Untitled Document

Description:

Bob Smith Industries CA Glue

Insta-Cure+™ Super Glue, CA

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Directions:

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Insta-Cure+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning

 

Works Best On:

  • Balsa Wood
  • Soft Wood

Works Good On:

  • Hard Wood
  • Glass & Metals
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Rubber
  • Laminating
  • Water-Resistant
  • Reinforcing

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

 

 

 

 

BSI-CA-56b908caadc59

$4.99

Value Planes Sinbad Powered Glider 48" (1230mm) Park Flyer Electric Glider Kit

Value Planes Sinbad Powered Glider 48" (1230mm) Park Flyer Electric Glider Kit

Value Planes Sinbad Powered Glider 48" (1230mm) Park Flyer Electric Glider Kit

See it action, click on link: High Speed Rapid Glider

Pre-order sale $50 off! Estimated Arrival  Feb 2024

  • This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive a unit from the first shipment.

Credit Card or other payment will be charged at the time of order.

VP-MSB48A-Micro Sinbad

$59.99


Back to Top