40A ESC with Heat Sink BEC

Contact UsCustomer Reviews

40A ESC with Heat Sink BEC

Market Price: $43.99
Our Price:

$36.99


You Save

16%

Quantity

OUT OF STOCK


Availability No items available
Weight 0.25 lbs
SKU BBR-BSC-40A
Manufacturer Blue Bird

40A ESC with Heat Sink BEC, Suitable for 2S-4S Airplane or Heli

FEATURES:

  • Smooth forward operation
  • Extremely low resistance
  • 32KHz Frequency operation
  • P.O.R Power on reset
  • Easy user programmable features
  • Audible arming signal
  • Microprocessor Controlled
  • B.E.C: 5.0V / 3.0A
  • Programmable low volt cut off for Li-Po
  • Safe start protection
  • Micro size allows for ease of installation
  • Programmable motor rotation

SPECIFICATIONS:

Size:                                     61 x 21 x 13 mm

Weight:                                30.5 g

Max Continuous Current:    40 Amps

Operating Voltage Range:   6 to 15V

On Resistance:                    2.56 mOHM

Max BEC Output:                3 Amps @ 5.0V

     2S~4S Lithium, 6~12 Cell Ni, with Heat Sink

 

DETAILS:

Watt-out-put limit: The output is rated at 388 watts. Under this watt, the speed controller will work normally. When the wattage reaches approximately 410~420, it will automatically shutdown to prevent the speed controller from overloading.

Temperature protection: When the temperature reaches 95 degrees C, the speed controller will slowdown and the output will reduce to 50% and the on board LED will turn on. You must move the throttle stick to idle position to reset the speed controller and will work once you throttle up again.

Warning:

DO NOT install a motor which rating is larger than the speed control’s limit to avoid damage or burn down.

 


: *
: *
: *
 

Redwing RC 1/4 Zip Poly-Microfiber Pullover

Redwing RC 1/4 Zip Poly-Micro Shell Lined Pullover
Show your Redwing pride at the field and add to your Redwing swag collection!

100% cotton

Available in S, M, L, XL, 2XL, 3XL

RWRC-Pullover

$29.99

Bob Smith Industries Quik-Cure Epoxy (5 Min)

Bob Smith Industries Quik-Cure Epoxy (5 Min)

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

BSI-PX-201

$11.99

Skylark-S F3A 15e 37" (950mm) - PNP

Skylark-S F3A 15e 37" (950mm) - PNP 

FREE Shipping US only--contact us at [email protected] to calculate international shipping cost

*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

Now this is a unique plane for sure! Upgrade that asphalt runway of yours to a pond, lake or pool! The PBY Catalina seaplane is something you have to experience! It took months of flight testing and designing to produce this amazing aircraft. The Catalina is capable of stable flight at really slow speeds making it perfect for any skill level. Get ready for some really neat details and a large 55 inch wingspan! The Catalina is blast to fly and and landing on on water is a piece of cake.

Key Features:

  • Powerful twin 480 size (1100kv) outrunner brushless power system w/ 3-bladed props
  • Twin 30A Brushless ESC with Switch-Mode BEC
  • Durable and lightweight EPO construction with many surface details
  • Excellent Flight Performance
  • Detailed Body Structure
  • Suitable for Both Intermediate and Experienced Pilots.
  • Removable / detachable wing. (4 screws)

 

Specifications:

Wingspan: 58 inches / 1470mm
Overall Length: 37 inches / 940mm
Flying Weight: 45oz  / 1275 w/Battery
Motor Size: Twin 480 size (2814-1100kv) outrunner brushless motors (installed)
Propeller: 2 x 3 blade props 8 x 6 x 3
Radio / Transmitter 4 Channel (NOT INCLUDED)
Receiver +4 Channel (NOT INCLUDED)
Servos: 4 servos installed ( 2 x 9g - 2 x 17g)
Speed Control : 1 x Dectrum 30A Brushless with Switch-Mode BEC (installed)
Battery: 11.1V 2200 mah (not included)
Charger: 3S+ (11.8v) Lipo Charger (NOT INCLUDED)
Flight Times

Average (8-12 mins)

Assembly Time

Approx 45min

 

 

 


 

HT-Skylark-S-F3A

$180.00