RedwingRC Accessories

more offers

55A ESC with Heat Sink BEC

Ask a question about this product

Printable version

Options

Market Price: $58.99

Our Price:

$48.99

You Save

17%

Quantity (1)

Details


Availability	1 in stock
Weight	0.25 lbs
SKU	BBR-BSC-55A
Manufacturer	Blue Bird

55A ESC with Heat Sink BEC, Suitable for 2S-5S Airplane, Glider or Heli

FEATURES:

Smooth forward operation
Extremely low resistance
32KHz Frequency operation
P.O.R Power on reset
Easy user programmable features
Audible arming signal
Microprocessor Controlled
B.E.C: 5.0V / 4.0A
Programmable low volt cut off for Li-Po
Safe start protection
Micro size allows for ease of installation
Programmable motor rotation

SPECIFICATIONS:

Size: 88 x 29 x 13 mm

Weight: 51.5 g

Max Continuous Current: 55 Amps

Operating Voltage Range: 6 to 15V

On Resistance: 1.56 mOHM

Max BEC Output: 4 Amps @ 5.0V

2S~5S Lithium, 6~19 Cell Ni, with Heat Sink

DETAILS:

Watt-out-put limit: The output is rated at 388 watts. Under this watt, the speed controller will work normally. When the wattage reaches approximately 410~420, it will automatically shutdown to prevent the speed controller from overloading.

Temperature protection: When the temperature reaches 95 degrees C, the speed controller will slowdown and the output will reduce to 50% and the on board LED will turn on. You must move the throttle stick to idle position to reset the speed controller and will work once you throttle up again.

Warning:

DO NOT install a motor which rating is larger than the speed control’s limit to avoid damage or burn down.

Muffler Silencer for DLE 20 or DLE 35RA

Description:

Are you tired of fumbling through your things to find ear plugs JUST to start your RC engine? Well, as always, Redwing RC has you covered. These DLE muffler silencers are a great alternative to blowing out your ear drums. They significantly reduce the high pitched noise of the DLE 20 engine and makes it sound more scale - and they hardly increase the temperature of your cylinder head.

Will work for the DLE 20, or the DLE 35RA. They do NOT work on the DLE 30, or other sizes.

Simply press fit the silencer in place and then hold with the included silicone tubing and zip ties - or drill a hole and install a screw - either way installation is easy - and these bad boys don't go anywhere! Friction alone helps keep them in place.

This silencer is a simple way to reduce the noise level of your rc engine without compromising the quality or performance - and at OUR price?! Simply cannot be beat.

Sold individually! 355RA with two exhaust pipes will need 2.

D-2020M

$16.99 16.99

DA-150L Gas Engine

Description:

Lighter case and cylinders! Improved reed valve!
A true legend in the world of giant scale aerobatics! Since the release of the DA150 in 1999, it has been the dominant engine for aerobatic competition. Years of refinement bring you the best in contest proven performance and reliability!

Specifications:

Displacement: 150cc (9.15 cu in)
Bore and Stroke: 1.9291in x 1.5748in (49mm x 40mm)
Weight: 7.26 lb (3.3 kilos)
Output: 16.5 hp
RPM Range: 1000-6500
RPM Max: 8500
Requires: unleaded gasoline, oil, ignition battery & propeller
Includes: electronic ignition, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & mounting template
Suggested Propellers:32x12, 32x10, 30x12
Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.

Features:

DA engines are designed using the latest tools and techniques, including 3d CAD and stereo lithography
INCLUDES: Engine, spark plug, standoffs, ignition, instruction manual
DA auto advance electronic igniton
Walbro Carb
Exclusive DA designed cylinders, pistons, and crank shaft
CNC milled, 7075 aluminum alloy crankcase
low vibration
Most torque in its class
Long rod to stroke ratio
Aerobatic power curve
Three crank bearings, long spacing between front bearings
Four petal reed ralve, bottom induction