Slo-Zap (Thick) 1oz Bottle (Yellow Label)

Contact UsCustomer Reviews
  0  
  4. Slo-Zap (Thick) 1oz Bottle (Yellow Label)

Slo-Zap (Thick) 1oz Bottle (Yellow Label)

Ask a question about this product
Printable version

Share

Options

Market Price: $11.99
Our Price:

$9.99
You Save

17%
Quantity (8)

Details

Availability 8 in stock
Weight 1.01 lbs
SKU PT-20

Slo-Zap (Thick) 1oz Bottle

Thick and strong for high-stress areas. Works well on hard woods such as Maple and Oak. In modeling its ideal for laminating wood parts and forming fillets. Because its thick, it will not run, it forms a very clean even fillet around all types of joints. The high cured strength means it works great on higher stress areas. Allows 30 seconds for positioning and cures in 60 seconds or less. To accelerate cure time use Zip Kicker.
SDS Sheet


: *
: *
: *
 
30cc Extra 330- BLUE Graphics Set

30cc Extra 330- BLUE Graphics Set

Graphics for the Blue 30cc Extra 330

graphics-30-Extra-Blue

$49.99

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0086T

$41.99

BMS-590SG, LARGE OFF-ROAD MONSTER TRUCK ROCK CRAWLER HV-DIGITAL, MEGA TORQUE, HIGH SPEED, CORELESS +Servo Arm (63.3kg/879.2oz, 0.14sec at 8.4V)

BMS-590SG, LARGE OFF-ROAD MONSTER TRUCK ROCK CRAWLER HV-DIGITAL, MEGA TORQUE, HIGH SPEED, CORELESS +Servo Arm (63.3kg/879.2oz, 0.14sec at 8.4V)

BMS-590SG, LARGE OFF-ROAD MONSTER TRUCK ROCK CRAWLER HV-DIGITAL, MEGA TORQUE, HIGH SPEED, CORELESS +Servo Arm (63.3kg/879.2oz, 0.14sec at 8.4V)

BBR-BMS-590SG

$102.99


Back to Top