Power HD B5 Brushless Servo - 20.0 kg/cm (277.75 oz/in), 0.066 sec - High Voltage

Description:

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

Specs:

• Torque:
  • 105.54 oz/in at 6V (7.6 kg/cm)
  • 125.00 oz/in at 7.4V (9.0 kg/cm)
     
• Speed:
  • .055 sec at 6V
  • .042 sec at 7.4V
     
• Voltage: 6.0 ~ 7.4 DC Volts
• Weight: 1.58 oz (45g)
• Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
   
• Operating Temp- -20℃~60℃
• Working Frequency - 1520μs / 500hz
• Brushless Motor
• Ball Bearing x 2
• Titanium & Steel Gears

Gaoneng GNB 450mAh 1S 3.8V HV 4.35V LiPo Battery 80C JST-PH 2.0 PowerWhoop mCPX Connector (4pcs) (EMAX Tinyhawk Brushless Micro Racing Drone Inductrix FPV Plus Kingkong Tiny 7 Beta75S Micro FPV Racing Drone etc)

30cc Yak 55 - Purple or Green 

Description:

Now with Carbon Fiber Reinforcements!

The Yak 55M was first built in the late 1980s based off the original Yak55. It further increased the roll rate and agility to create the aerobatic monster known as the Yak 55M!

The Yak 55M like its related Yak 54, has great qualities for both 3d and precision flying. It has very scale features that closely match the original Yak 55M.

The unique scheme on this Yak 55M was created by professional designer Xavier Stevens! With its striking contrast and beautiful curves, this Yak 55M is sure to catch the attention of the crowd wherever you fly!

It is lightweight enough to fly well, but as ALL our Redwing models, this 30cc Yak 55m has been reinforced in the "right places" such as the fire wall, landing gear, and other vulnerable spots.



Videos on this plane:





Buy Replacement Parts
Product Manual




Specifications:

• Wing span: 73"
• Wing area: 1005 sq. in.
• All up flying weight: 10.5-12lb depending on build style
• Length: 66"
• Cowl:
  • Inside Width: 8.5" (215.9mm)
  • Inside Height: 8.5" (215.9mm)
• Engine: (Any 30-36cc engine) Recommended: DLE 30, DLE 35, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: 3"
• Recommended CG: 5.25" to 5.5" from LE at Root of the wing
• Recommended Prop Size:
  • 18x8/10, 20x10 for sport
  • 18x619x6/8, 20x6/8 for 3d
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon Fiber Stringers run full length of fuse
• Painted Control horns to match paint scheme of plane
• Vortex Generators
• Servo Reinforcement pieces

We DO ship our planes internationally!

Please contact us with your location for more specific cost.