A-10 Thunderbolt Green 64mm EDF Jet

Contact UsCustomer Reviews

A-10 Thunderbolt Green 64mm EDF Jet

Our Price:

$229.99

PNP or RTF version
Quantity

OUT OF STOCK


Availability No items available
Weight 5.00 lbs
SKU DY36152
Manufacturer Dynam

Description:

RedwingRC Plug-and-Play aircraft! **Now available in RTF!!

A-10 Thunderbolt II also known as 'The Warthog' is an American single-seat, twin-engine, straight-wing jet aircraft designed to provide close air support of ground forces. The A-10 earned its reputation as the 'Tank Buster' with its assortment of lethal air to ground armaments effectively annihilation enemy ground forces and reinforcements. It was the first USAF aircraft designed exclusively for close air support.

The Dynam A-10 has been an awesome flying machine in the Dynam Fleet. Dynam decided to upgrade this bird with servo-less retracts. The A-10 has superb maneuverability even at low speeds and altitude, which is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. This model gets power from two 64mm electric ducted fan units. The package comes 90% Ready To Fly, just add your choice of TX/RX and battery. All Servos, motors and other electronics are preinstalled from factory. Like all the planes in the Dynam range, the Dynam A-10 is constructed of quality EPO foam and finished to a high standard that represents an excellent replica of the real aircraft.

What is included:

  • PNP--Dynam A-10 airplane, motor, ESC, 4*9g servos
  • RTF--Dynam A-10 airplane, motor, ESC, 4*9g servos, MSR66A Sport Receiver, GAVIN-6A transmitter, 11.1V 2200mAh 25C Li-Po battery and charger

What is required (PNP):

  • 6-Channel or above transmitter
  • 6-Channel receiver
  • 11.1V 2200mAh 25C Li-Po battery and charger

Specifications:

  • Material: EPO Foam
  • Wing Span: 1080mm(42.5in)
  • Flying Weight: 1000g
  • Wing Loading: N/A      
  • Fuselage Length: 995mm(39.2in)
  • Center of Gravity: 70-75mm from the leading edge of the wing at the root
  • Motor: BM2815D-KV3600*2
  • ESC: 40A ESC with 3A BEC*2pcs
  • Propeller: N/A
  • Servo: 9g*4pcs
  • Elevator: Yes
  • Rudder: No
  • Ailerons: Yes
  • Flaps: No
  • Landing Gear: E retract

1 hour assembly time

: *
: *
: *
 

Savox SB-2273 SG HV Digital Brushless Servo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider - the Savox SB-2273.

The Savox SB-2273 servos are a more powerful, SUPER torque, brushless digital servo that can fit every control surface for giant scale aircrafts - while still being super lightweight, 20% lighter than its kind! Sounds great - right?! These servos combine leading edge technology with super high 12 bit resolution and unique steel gears.

The brushless motor promises the great high speed, high torque performance that is extremely efficient! Savox has used this smart technology in the SB-2273's to 100% GUARANTEE that these servos won't suck the life out of your battery by only using enough juice to power that particular task.

All in all - these servos are a great choice for your RC plane. Order yours now!

 

Specifications:

  • Torque:
    • 319.4 oz/in at 4.8V
    • 388.8 oz/in at 6V
       
  • Speed:
    • .12 sec at 4.8V
    • .095 sec at 6V
       
  • Voltage: 4.8V to 6V
  • Weight: 2.4 oz (69g)
  • Size: 1.58 x .79 x 1.51 in (40.3 x 20.2 x 38.5 mm)
     
  • Gear Type - Unique Steel
  • Case - Full Aluminum
  • Bearing - dual ball bearings
  • Frequency - 250-333hz
  • Output Shaft - 25 Tooth Spline

 

 

 

GET YOURS TODAY!

 

 

 

SAV-SB-2273

$99.99

BLS-1306, HV-DIGITAL, HIGH TORQUE, ULTRA HIGH SPEED, BRUSHLESS, TITANIUM GEARS

BLS-1306, HV-DIGITAL, HIGH TORQUE, ULTRA HIGH SPEED, BRUSHLESS, TITANIUM GEARS

BBR-BLS-1306

$59.99

Spot On Standoff 30mm for 1/4-20 or 6mm Bolt

Spot On Standoff 30mm for 1/4-20 or 6mm Bolt

High Quality 1" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
 

 

SPO-TRA-013

$8.00