Redwing RC Rectangle Wingbags
Announcing New Rectangle Wing Bags from Redwing RC!!! RWRC wingbags are made with the finest materials to protect your precious investment. There are 2 openings, one slot for each wing, a wing tube slot, that velcros shut, and comfortable carrying straps. We also took customer recommendations to add a small handle so bags can now be hung on hooks. RWRC bags now come with a stylish Redwing RC zipper pull to prevent your wings from falling out when carrying. The outside is made of high quality heavy duty 1680 Denier abrasion resistant durable fabric which will protect your wings from sun damage/fading and are weather resistant. There is thick foam padding to protect the wings from the outside and each wing inside, as well as a Llightweight Oxford fabric added to the inside for a soft feel that is both durable and naturally resistant to wrinkles and comes with a PU coating for added protection against moisture! Another improvement is an additional pocket added to the outer pocket to provide more options for securing and holding parts or stabs. Other bags that come close to this quality are over $200 but RWRC kept all of our bags affordable (under $170) and a great value! Get them while you can. They always go fast when in stock!!
Approximate Dimensions: Medium: 55 x 20 inches Large: 86 x 26 inches PLEASE confirm size needed before ordering! |
RWRC Rectangle Wing Bags
Redwing RC Wingbags
Redwing RC Wingbags
Redwing RC Wingbags
Redwing RC Tapered Wingbags
Description: Specifications:
Approximate Dimensions:
|
WB-Tapered
$99.99
Bob Smith Industries Super-Gold+ Odorless Foam Safe CA (Medium)
Untitled Document Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
BSI-CA-56b908cace009
$12.99
Bob Smith Industries Insta-Set
Untitled Document Description:Bob Smith Industries Insta-Set Insta-Set™INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
Directions: After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.
Works Best On:
Click to Download Safety Data Sheet
|
BSI-AC-151
$5.99