Redwing RC 1/4 Zip Poly-Microfiber Pullover

Description:
5 Pairs of Deans Style Connectors

Nylon T-connectors. These are VERY similar to Dean's style T connectors, and are fully compatible with Deans connectors.
Pack includes 5 male and 5 female connectors.



These connectors are made from Nylon, making them very tough and difficult to melt, even with the worst of soldering skills.
 

Features:

• Durable nylon connectors
• Compatible with Deans large connectors
• Easy to solder
• Positive/negative can only connect one way ensuring proper polarity

PRICE FOR PACKS OF 5 PAIR

Bob Smith Industries 312 Replacement Top for CA Glues

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.

Works Best On:

• All Cyanoacrylates

Avaliable in 1 oz Size.

Click to Download Safety Data Sheet

Description:

Pulse Lithium Polymer Batteries - Setting a New Standard.

As Lithium Polymer battery technology continues to push new boundaries, Pulse Lithium Polymer Batteries bring a whole new element into the mix - power & performance at a price that simply can't be ignored. 

Designed specifically for the demands of the latest power plants, not to mention the new realm of extreme 3D flight, Pulse brings a whole new battery to bear at a cost never seen before. Simply put, premium power no longer comes at a premium price.

Incorporating the latest advancements in Lithium Polymer technology, Pulse Batteries are designed to bring performance levels to a new stratosphere with 35C, 45C, and 65C battery packs in multiple capacities for the helicopter of your choice. Add the 5C charge rates, and the fun just begins. 

Pulse Lithium Polymer Batteries - Can You Feel Your Pulse Quicken?

Pulse Batteries Available Individually or in a PRE-MADE System!

Take the guesswork out of your electric battery set up- we've done it for you! Check out the suggested set up systems for 30cc and 50cc.

LiPo 4500mah 5S, 18.5v - $104.99 each

30cc 10S System: Two (2) LiPo 4500mah 5S, 18.5v - $208

• Voltage: 18.5V
• Cell Count: 5S
• Capacity: 4500mAh
• Discharge Rate: 45C
• Dimensions: 159mm x 45mm x 38mm (LxWxH)
• Weight: 630g
• Balance Tap: JST-XH

LiPo 3300mah 45C 6S, 22.2v - $94.99 each

30cc 12S System #1: Two (2) LiPo 3300mah 45C 6S, 22.2v - $188

• Voltage: 22.2V
• Cell Count: 6S
• Capacity: 3300mah
• Discharge Rate: 45C
• Charge Rate: 5C
• Dimensions: 139mm x 42mm x 43mm  (LxWxH)
• Weight: 567g
• Balance Tap: JST-XH

LiPo 3700mah 45C 6S, 22.2v - $109.99 each

30cc 12S System #2: Two (2) LiPo 3700mah 45C 6S, 22.2v - $218

• Voltage: 22.2V
• Cell Count: 6S
• Capacity: 3700mAh
• Discharge Rate: 45C
• Charge Rate: 5C
• Dimensions: 138mm x 44.5mm x 48mm (LxWxH)
• Weight: 567g
• Balance Tap: JST-XH

LiPo 4100mah 45C 6S, 22.2v - $119.99 each

30cc 12S System #3: Two (2) LiPo 4100mah 45C 6S, 22.2v - $238

• Voltage: 22.2V
• Cell Count: 6S
• Capacity: 4100mAh
• Discharge Rate: 45C
• Charge Rate: 5C
• Dimensions: 137mm x 53mm x 42mm (LxWxH)
• Weight: 680 grams
• Balance Tap: JST-XH

LiPo 5000mah 45C 6S, 22.2v - $139.99 each

50cc 12S System #1: Two (2) LiPo 5000mah 45C 6S, 22.2v - $278

• Voltage: 22.2V
• Cell Count: 6S
• Capacity: 5000mah
• Discharge Rate: 45C
• Charge Rate: 5C
• Dimensions: 158mm x 45mm x 49mm  (LxWxH)
• Weight: 800g
• Balance Tap: JST-XH

LiPo 5500mah 45C 6S, 22.2v - $149.95 each

50cc 12S System #2: Two (2) LiPo 5500mah 45C 6S, 22.2v - $298

• Voltage: 22.2V
• Cell Count: 6S
• Capacity: 5500mah
• Discharge Rate: 45C
• Charge Rate: 5C
• Dimensions: 160mm x 44.5mm x 52mm  (LxWxH)
• Weight: 873g
• Balance Tap: JST-XH

LiPo 6000mah 35C 6S, 22.2v - $149.99 each

50cc 12S System #3: Two (2) LiPo 6000mah 35C 6S, 22.2v - $298

• Cell Count: 6S 22.2V
• Capacity: 6000mah
• Discharge Rate: 35C
• Charge Rate: 5C 
• Dimensions: 160mm x 49mm x 51mm  (LxWxH)
• Weight: 884g
• Balance Tap: JST-XH

Purchase pre-made system or buy individually! Select below.