Hitec 7954 SH HV (High Voltage Servo)

Contact UsCustomer Reviews

Hitec 7954 SH HV (High Voltage Servo)

Hitec 7954 SH HV (High Voltage Servo)
Hitec 7954 SH HV (High Voltage Servo)
Hitec 7954 SH HV (High Voltage Servo)
Hitec 7954 SH HV (High Voltage Servo)
Hitec 7954 SH HV (High Voltage Servo)
Market Price: $145.95
Our Price:

$99.99


You Save

31%

Quantity

OUT OF STOCK


Availability No items available
Weight 0.35 lbs
SKU HS-7954 SH

*** This item is discontinued ***  replaced with D-954SW
Discontinued By Vendor

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Features

  • G2 Digital Circuit
  • HV Coreless Motor
  • Dual Ball Bearing Supported Output Shaft
  • Steel Gear Train (MK first gear)

Programmable Features Include:

  • Dead Band Width 
  • Direction of Rotation 
  • Speed of Rotation (slower) 
  • End Points 
  • Neutral Points 
  • Fail Safe On/Off 
  • Fail Safe Point 
  • Resolution* (default is high resolution) 
  • Overload Protection* (default is off)

*These features are only programmable with the HFP-20 field programmer.

 

Specifications

  • Torque:
    • 333 oz/in at 6V (24 kg/cm)
    • 403 oz/in at 7.4V (29 kg/cm)
       
  • Speed:
    • .15 sec at 6V
    • .12 sec at 7.4V
       
  • Voltage: 6V - 7.4V
  • Weight: 2.30oz (65.2g)
  • Size: 39.9 x 19.8 x 36.8mm (1.57 x 0.78 x 1.45)
     
  • Motor Type: Coreless
  • Bearing Type: Dual Ball Bearings
     
: *
: *
: *
 

Black Marlin MX RTR Boat

RGRB1208 

RGRB1130

$65.99

GliderCG Scale Mini Version (Center of Gravity (CG) digital balance device, Compact Design for Large Models up to 55lbs (25 kg) with/without landing gear)

GliderCG Scale Mini Version (Center of Gravity (CG) digital balance device, Compact Design for Large Models up to 55lbs (25 kg) with/without landing gear)

GliderCG Standard V3 (Center of Gravity (CG) digital balance device, Designed for F5J, F3B, and F3F Gliders, Works on all RC model airplanes!)

Based on the original development of Olav Kalhovd, GliderCG is a center of gravity (CG) digital balance device for RC planes able to provide the exact information of where the CG is located on the aircraft via a display which also provides information of the aircrafts's total weight.

Simply place the aircraft/sailplane on the scale and obtain it's CG without trying to balance it on your fingers or mark the wings to supporting them on precarious structures.

Once the aircraft/sailplane is placed on the scale, you can vary the CG by moving e.g. the battery and GliderCG will automatically inform you of the new CG in real-time.  Easy and simple!

The GliderCG family was born with the aim of being able to transfer the concept of digital measurement of the CG to the different types of aircraft and radio control gliders. For this reason there is a specific device for each of the different popular disciplines: GliderCG F3K/DLG, GliderCG Standard, GliderCG Plus and GliderCG Scale. There is a device that will work on all RC aircraft.

GliderCG is constantly being improved and has evolved over time to provide more features and enhancements. Today's GliderCG devices are much more modern and advanced than the initial ones produced in 2018.

Based in the GliderCG v2 platform and with the constant desire for improvement, development on all aspects of the device, both hardware and software, to offer an improved device in a compact form factor for easy transport and storage when not in use.

This model is designed for F5J, F3B, and F3F models however will work on all RC model airplanes meeting the weight and dimension limits below listed in specifications.

FEATURES

  • Folding arms with solid locking mechanism
  • Battery level indicator (WiFi Interface)
  • Sliding lid access to the battery compartment
  • Greater stability
  • WiFi + OLED LCD display

Additionally, this unit provides the ability to view data through the WiFi connection. The WiFi connection also provides the option to save the CG configuration of different models to review historical readings and the ability to compare readings after e.g. repairs, etc.

GliderCG Standard v3 includes a set of smaller wing adapters to allow the measurement of planes with a narrow wing chord (i.e. DLG/F3K models).

Stacks Image 65

SPECIFICATIONS

  • Maximum weight: 17.6 lbs / 8 kg
  • Maximum fuselage width: 3.4 in
  • Maximum fuselage height (from bottom fuselage to wing bottom): 3.4 in / 86 mm
  • Leading edge to rear support pad distance: 5.9 in / 150 mm
  • Power: 9V DC (6LR61)


DOCUMENTATION

FREE Shipping for USA only. Contact us at [email protected] to calculate international shipping cost.

CG-scale-mini

$479.00