Safe Parallel Charge Board for 2S JST-PH

Contact UsCustomer Reviews

Safe Parallel Charge Board for 2S JST-PH

Our Price:

$11.99

Quantity (9)

Availability 9 in stock
Weight 0.10 lbs
SKU EPB-2S-JST-PH

Safe Parallel Charge Board for 2S JST-PH

Compact, convenient, and safe, our Parallel Charge Board for UMX & 130X lets you charge and balance up to six batteries at a time, while self-resetting polyfuses protect your packs from any potential shorts.

This unique design serves as both a charging and balancing board for up to 6 of your 2S battery packs. Connect to your batteries with the JST-PH connectors, as used in the Blade 130X, Beast UMX or Sbach 342 UMX - or the new Brushless mCP X! Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 8" of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

As safe as they are convenient, these boards protect your batteries with built in polyfuses protecting each individual cell from harmful short circuits or power surges.

Specifications:

  • Input Charge Connector: Male 4mm Banana Plug
  • Input Balance Connector: Male 2S JST-XH
  • Output Connector: 6x 2S Female JST-PH
  • Wire Type: 18 AWG Silicone Charge Lead, 20 AWG Silicone Balance Lead
  • Max Charge Rating: 1.5A per battery
  • Fuse Rating: 1.5A
  • Wire Length: 8"

: *
: *
: *
 

Safe Micro Paraboard (Pico/MCPX) 1S

Safe Micro Paraboard (Pico/MCPX)

EPB-Micro-MCPX

$11.99

Paraboard Parallel Charging Board for Lipo /Traxxas Connector

Paraboard Parallel Charging Board for Lipo /Traxxas Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

EPB-TRX

$14.95

HiTec HSB-9485SH High Torque, Brushless, Steel Gear Servo .15sec/351oz @ 7.4v

HSB-9485SH High Torque, Brushless, Steel Gear Servo .15sec/351oz @ 7.4v

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for pilots with the need for speed!

Features:

  • Power Efficient Brushless Motor Controller
    Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.
  • Custom NeuMotor
    Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.
  • Constant Torque Output:
    Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.
  • Hybrid MPD 1st Gear:
    Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.
  • Industry-Leading Titanium Gear Train
    Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.
  • 25-Tooth Standard Spline
    Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.
     

    Specifications:

    • Torque:
      • 236 oz/in at 6V (17.0 kg-cm)
      • 236 oz/in at 7.4V (17.0 kg-cm)
         
    • Speed:
      • .08 sec at 6V
      • .06 sec at 7.4V
         
    • Voltage: 6V - 7.4V
    • Weight: 2.40oz (68g)
    • Size: 40 x 20 x 68 mm (1.57 x 0.79 x 1.50in)

HRC39486

$117.99

Dynam 12x6 Electric Prop (8mm Center Hole)

Dynam 12x6 Electric Prop (8mm Center Hole)
Dynam High Quality Carbon Fiber Electric Props. These props are durable and light, making them the ideal choice for your electric plane.

Available Sizes:

  • 9x6
  • 14x7
  • 15x6
  • 16x12
  • 17x12


    Features:

     

    • High Quality Carbon Fiber Weave
    • These carbon fiber propellers have been manufactured with very high standards.
    • Extremely light and strong with ultra thin and stiff carbon construction.
    • The center hole is 9mm and comes with a series of adapters to convert this all the way down to 3mm in 1mm increments.
    • The hub can also be reamed out safely to around 14mm.


     

DY-EP-12x6-8mm

$7.99

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & XT60 ENERGY METER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0086XT60

$41.99