Dynam C-182 Sky Trainer 1280mm (50") Wingspan - PNP or SRTF
| Dynam C-182 Sky Trainer 1280mm (50") Wingspan - PNP or SRTF Dynam has taken the trusty C-182 sky trainer and given it a total make over from the ground up. It now really does replicate the full size even to the navigation lights. The durability of the EPO foam has been strengthened with a high gloss surface finish and factory applied decals. Stability (at medium and high speed flight) and high performance (at low speed flight) are two strong points of this airframe and together with the high power brushless motor, scale 3-blade propeller and long duration Li-Po battery, resulting in a great trainer and intermediate aircraft. Adding more realistic flight characteristics , the wing loading remains wonderfully light. This model also features scale flaps to provide great fun and effectively reduce the distance of Take-off and landing run. The pilot can easily perform aerobatics such as stall turns, inverted flight, point rolls, loops and bunts with minimal effort. This model now includes a Tomcat Skylord 30 Amp ESC with XT60 connector, LED lights with pre-soldered connector ends and LED light controller for static and flashing operations. Redwing RC is fond of these classic well-known trainers that grace our skies daily. The C-182 is an American four-seat, single-engined light airplane. It has the option of adding two child seats, installed in the baggage area. Introduced in 1956, the 182 has been produced in a number of variants, including a version with retractable landing gear, and is the second most popular C model, after the 172. The Dynam C-182 Trainer is the perfect trainer for those with some high-wing experience under their belts that would like to fly something in the scale civilian class. With a scale 3-blade propeller and flaps, you can enjoy numerous scale flights at your local field. What is included:
Smart-Ready-to-Fly (SRTF) includes a Detrum mini 6-channel 2.4GHz 6-axis gyro integrated receiver and a Detrum 6-channel 6A transmitter . It provides four different flight modes: Gyro off, Normal, Aerobatic, and Auto-Recovery (Auto Balance) and can be programmed from the matching transmitter. Just charge the included battery and with minimum assembly, it is ready to fly. What is required (PNP):
Key Features:
Specifications:
$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.
|
Slo-Zap (Thick) 1oz Bottle (Yellow Label)
| Slo-Zap (Thick) 1oz Bottle
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PT-20
$9.99
