HappyModel Mobula7 75mm 2S Four-Axis Brushless Whoop Racer Drone BNF with Frsky XM+ receiver (Black Frame)

Contact UsCustomer Reviews

HappyModel Mobula7 75mm 2S Four-Axis Brushless Whoop Racer Drone BNF with Frsky XM+ receiver (Black Frame)

Market Price: $149.99
Our Price:

$99.99

You Save

33%

Extra Battery
Quantity

OUT OF STOCK


Availability No items available
Weight 1.00 lbs
SKU MF-Mobula7-Frsky-xm
Manufacturer Makerfire

Whoops have gone to the next level! The Mobula7 has taken the internet by storm given its speed and capabilities in such
a small package. Check out the videos and specs of the Mobula 7 by HappyModel below!

Features:

  • New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Smartaudio ready , change VTX bands, channels via OSD (Note: DSM2/DSMX and Frsky EU-LBT version are Serial-based 
    receivers, so Smartaudio is not compatible.)
  • Adjust the settings and the PID of the flight controller via OSD
  • DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Real Bind and Fly version
  • Buzzer Ready

Specifications:

  • Brand Name: Happymodel
  • Model: Mobula 7
  • Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
  • Wheelbase: 75mm
  • Version: Basic Version (Clear Frame)
  • Receiver: Compatible DSM2/DSMX Receiver       
  • Size: 98mm*98mm*36mm
  • Weight: 25.9g (without battery)

Note: This BNF version comes without a transmitter radio (remote controller).
Compatible with Frsky radios or Multi-Protocol radio

Package list:

1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver

Tuning your Mobula7:

Your Mobula7’s flight controller controls its flight through settings known as PIDS. Changing these changes the characteristics
of your quad’s flight. RWRC’s recommended Mobula7 tune is:

set p_pitch = 65
set i_pitch = 80
set d_pitch = 50
set f_pitch = 96
set p_roll = 65
set i_roll = 80
set d_roll = 50
set f_roll = 96
set p_yaw = 65
set i_yaw = 75
set d_yaw = 0
set f_yaw = 100

To setup this tune, connect your Mobula7 to betaflight and click the CLI tab. Copy and paste the above settings in, hit enter,
type save, then hit enter again. Enjoy your Mobula’s improved flight characteristics! 

The new betaflight configurator 10.5.0 and 10.5.1 are not compatible with Mobula7 and Mobula7 HD for now.

HappyModel suggests using Betaflight configurator 10.4.0 

Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Different version having different receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready

Firmware
(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
 
Onboard 5A 4 In 1 ESC

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
Onboard Frsky EU-LBT Version
(External XM+ receiver)
 

Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI

Onboard Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 

Onboard DSM2 / DSMX receiver version

Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
SE0802 16000KV Motor
Model: SE0802
KV: 16000KV
Configu-ration: 9N12P Stator Diamter: 8mm Stator Length: 2mm Shaft Diameter: Φ1.0 Motor Dimension (Dia.*Len) : Φ10.5*14.5mm Weight: 1.8g
Support 1-2S Lipo
  No.of Cells: 1S Lipo
Propeller
40mm 4-blade Propeller ( 4 CW + 4 CCW)
 

5.8G VTX AIO Camera
 

5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)

700TVL FOV120 Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm ( L*W )
Weight: 3g
 
Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0
Notes: Need 2pcs batteries for Series circuit
 


: *
: *
: *
 

LiFe Batteries 3S

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:

  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 3S 2100mah - 6.2oz
    • 3S 3100mah Life - 9oz
  • Size:
    • 3S 2100mah- 95mm x 29mm x 30mm
    • 3S 3000mah- 130mm x 42mm x 20mm
  • Voltage:
    • 3S 2100- 9.9 Volts
    • 3S 3000- 9.9 Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 14gauge Wire
  • Connectors: XT-60 Connector
  • Balancing lead

These batteries have the XT-60 connector.
 

 

 

  • 3S 2100mah - $33.99
  • 3S 3000mah - $49.99

****Batteries must ship surface mail due to hazmat restrictions and have been taking longer to reach destination****Express and Priority mail are not an option for surface ground mail.

LXT-3S-

$33.99

Gaoneng GNB 1S 350MAH 3.8V HV 4.35V 30C Lipo Battery PH2.0 Plug for BetaFPV Whoop RC FPV Racing Cine Whoop BetaFPV Drone (6pcs)

Gaoneng GNB 1S 350MAH 3.8V HV 4.35V 30C Lipo Battery PH2.0 Plug for BetaFPV Whoop RC FPV Racing Cine Whoop BetaFPV Drone (6pcs)

 

GNB-1S-350mah-30C

$24.99

Super Cub MX4 Micro EP 4-Channel RTF Airplane with PASS System

Super Cub MX4 Micro EP 4-Channel RTF Airplane with PASS System

RGRA1114

$99.99