CLS-28AWC Water Proof,+Lockable Servo Arm (32.7 kg/454.2oz, 0.05 sec @ 8.4V New generation Servo)

Ask a question about this product

Printable version

Options

Our Price:

$104.99

Quantity (8)

Details


Availability	8 in stock
Weight	0.52 lbs
SKU	BBR-CLS-28AWC
Manufacturer	Blue Bird

CLS-28AWC Water Proof,+Lockable Servo Arm (32.7 kg/454.2oz, 0.05 sec @ 8.4V New generation Servo)--Blue Bird's latest generation servo that is water proof and includes soft start, voltage, heat, rotor, and loss of control protections and includes a Lockable Aluminum Servo ARM! Perfect match for 1/8 scale Monster Truck/Crawler/Large Boat or 3D Plane!

Water Proof IP67 (Ingress Protection Rating, 6=Dust Tight, 7=Immersion up to 1M for 30 min)

Features:

★Soft Start Protection
★Over Voltage Protection
★Low Voltage Protection
★Locked Rotor Protection
★Temperature and Loss of signal Protection

APPLICATION / SUITABLE

Perfect for 1/8 Scale Buggy (Off-road), GT (On-Road), Monster Truck, Rock Crawler and Large Boats and 3D plane

ELECTRICAL SPECIFICATION (FUNCTION OF THE PERFORMANCE)

Torque At 6.0V	23.5 kg-cm / 326.4 oz-in
Torque At 7.4V	28.9 kg-cm / 401.4 oz-in
Torque At 8.4V	32.7 kg-cm / 454.2 oz-in
Speed At 6.0V	0.08 sec / 60°
Speed At 7.4V	0.06 sec / 60°
Speed At 8.4V	0.05 sec / 60°

PROTECTION MECHANISM

Soft Start Protection	Soft start to neutral position.
Over Voltage Protection	Over 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage Protection	Lower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor Protection	Stall in 5 sec, output torque goes down.
Temperature and Loss Signal Protection	Overheat 85 degree C, drive the protection mode and down 75 degree C return to normal mode. Loss of TX signal, servo willreturn to neutral position and lock.

POWER SUPPLY

Operating Voltage Range

4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S LiPo / 2S LiFe)

CONTROL SPECIFICATION

Control System	32-Bits CPU Digital Controller / AD 12-Bits ( 4096 Steps ) Frequency：Up to 333Hz / Neutral：1500us or 1520us
Dead Band Width	0.001ms ( Defualt: 1us )

MECHANICAL SPECIFICATIONS

Ball Bearing	Dual, Stronger Steel Bearings 1 piece oil sealed
Gear	All Steel Alloy Metal Gears
Cable	300mm(~12") Black Cased Cable
Motor	High Premium Coreless Motor
Horn / Gear Spline	25 Teeth ( Same as F-Type)

PHYSICAL SPECIFICATIONS

Dimension (mm)	40.6 x 20.6 x 41.2 mm / 1.6 x 0.81 x 1.62 in
Weight (gram)	85.0 ± 1 grams / 2.99 oz

Includes Servo and Aluminum Servo Arm

GT Power 8S Battery Capacity Meter ( Battery Voltage Capacity Checker/ Balance Discharger

Description:

The new GT Power Cellmeter-8 is a must have tool for the RC Hobbyist, not only is it capable of instantly checking the overall and individual cell voltage of Lipo/Life & Li-ion batteries (with balance plugs fitted) it can also give you an instant reading of the remaining capacity of the battery at the same time, so no guess work! The mode button also allows you to check highest and lowest individual cells and voltage differences between individual cells, finally, as well as the Lithium battery port, there is an additional receiver style 3 pin port for checking overall voltage on Nimh/Nicd RX batteries.

The new GT Power Cellmeter-8 is a simple, fast and brilliant way to check battery voltage and most importantly, help you determine the condition of your packs within seconds, it is the must have battery checker for the toolbox of every RC pilot/driver!

Features:
Mini size, super portability
High quality and exquisite craftsmanship
Designed for Li-Po, Li-Hv, Li-Fe, Li-ion, Nickel batteries, highly effectively manage your different batteries for better safety use
The input port supports the detection of up to 8S battery
Not only test voltage of each cell battery, but also discharge difference volume for balance
All Status Display: 3 button operation, easy to switch as you wish
Also acting as PPM servo tester

Specifications:
Brand name: G.T.POWER
Display: LED
Input voltage: 4.2 - 33.6V
Supported Batt. Type: LiPo, LiHv, LiFe, Li-ion, Ni-Cd
Balance Cells: 1~8S
Size: 85 * 55 * 10mm
Product weight: 50.4g

Package Information:
Package size: 16.5 * 11.5 * 2.5cm / 6.5 * 4.5 * 1in
Package weight: 72g / 2.6oz
Plastic package

Packing include:
1 * Battery Voltage Capacity Meter
1 * English Manual