PowerBox Competition SR2, with Sensor Switch & TFT-Display

Contact UsCustomer Reviews

PowerBox Competition SR2, with Sensor Switch & TFT-Display

Our Price:

$434.50

Quantity (5)

Availability 5 in stock
Weight 1.00 lbs
SKU PBS-4450
Manufacturer PowerBox Systems

PowerBox Competition SR2, with Sensor Switch & Display

Click Here for the Instruction Manual

The Competition SR2 offers outstanding functionality, and sets new standards in its class!

Ten years ago the first Competition SRS was introduced. At that time it represented a milestone in the redundant deployment of receivers using our new type of bus technology. The unrestricted output assignment, servo matching and linking to early telemetry systems were unique features, and remained so for a long time.

Technology has continued to develop, and modellers' requirements have become more exacting. Here at PowerBox Systems we are proud to present our latest development: the PowerBox Competition SR2. Incorporating a new external look and the very latest technology, this single unit integrates more than twenty years of experience in the design and construction of airborne electronics.

The external changes are immediately evident: the most obvious and eye-catching feature is the new full-colour TFT screen, which is clearly legible even in full sunshine. The size of the screen has allowed us to include a self-explanatory menu structure which is so simple to use that its operation has raised not a single query from our test-pilots. Another obvious change is the large heat-sink, machined from solid metal, which significantly enhances the performance of the power supply. At the same time we were able to reduce the overall size of the Competition SR2 substantially. The associated Sensor-Switch and TFT screen are also housed in a machined aluminium case, matching the quality appearance of the SR2 itself.

However, the most significant innovations only become evident once the unit is switched on. The main display contains all the essential data - including battery voltage, current, consumed capacity and all receiver-relevant information - which can be viewed at a glance. The screen also displays status messages concerning the iGyroSAT or GPS III, if connected to the system.

The menu system is clearly and logically laid out, and includes many new functions as well as the familiar menu points - and all in two languages: German and English! Important new features implemented in the new Competition SR2 include the most efficient and sophisticated iGyro technology ever developed by PowerBox-Systems.

Used in conjunction with the optional iGyroSAT sensor, the system offers twelve gyro axes which cater for every existing model variant. The highly refined Setup Assistant enables the pilot to set up complex models, such as types with dual thrust vectors, ailerons and tailerons, in just a few minutes. Once the Assistant has been completed, the transmitter channels are assigned, the directions of gyro effect are set, and the servos connected to the outputs.

Each gyro axis can also be finely adjusted individually from the transmitter using separate channels. If an initial test-flight shows up a need to fine-tune the iGyro to meet individual requirements, a whole series of Expert settings cover every possible need.

The servo matching feature is now displayed in graphic form on the screen, and the PowerBox Competition SR2 also allows the servo response to be adjusted using five curve points. A new development is automatic servo matching. It is a very simple matter to assign and select one or two servos in addition to the primary one, and these two or three servos can be matched accurately to each other in just a few seconds with a single button-press!

The Competition SR2 incorporates two independent door sequencers. The standard function is designed for a retractable undercarriage, while the second can be used to implement systems such as a latching canopy control system without any additional devices. The Setup Assistant is capable of setting up the first door sequencer in just a few minutes, and three modes of operation are available. The graphic on-screen display makes additional non-standard settings very easy to set up; the entire sequential process can be observed at a glance.

If you use a PowerBox or Jeti RC system, virtually all* the functions of the Competition SR2 can be controlled and adjusted from the transmitter. The SR2 caters for every aspect of telemetry for battery and receiver data with all supported systems. If a GPS III is connected, then GPS data are also available - limited only by the facilities of the RC system in use.

*except the sequencers and Setup Assistant

FEATURES:

  • 22 channels
  • High-performance battery backer with high continuous load capacity
  • 2.4” TFT screen, legible in sunlight
  • Bi-lingual menu system
  • Consistent duplication of all power electronics
  • Redundant electronic switch
  • Servo matching for all 22 outputs
  • Auto matching function
  • Two independent door sequencers with Setup Assistant
  • The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
  • Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
  • Individual gain control for all twelve gyro outputs
  • Special regulatory algorithm for fixed-wing models
  • System detects all transmitter mixers
  • Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
  • Graphic menu diagrams ensure ultra-simple programming
  • Fast basic setup procedure using the sophisticated Assistant
  • Optional GPS III for speed-dependent gyro compensation
  • Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
  • Transmission of battery, receiver and GPS* data
  • Virtually all features can be controlled from PowerBox and Jeti transmitters
  • Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
  • Servo feedback current suppression
  • Latest 32-bit micro-processor for precise, high-speed signal processing
  • High-performance machined heat-sink for optimised heat diffusion
  • Machined, anodised aluminium switch and screen case
  • Compact dimensions

SPECS:

  • Operating voltage 4.0V - 9.0V
  • Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
  • Current drain Power-on state 260mA
  • Current drain Standby 30µA
  • Maximum load current 2x40A (<30s)
  • Drop-out voltage 0.3V
  • Output voltage 6.0V, 7.4V, 7.8V, unregulated
  • Signal input serial
  • Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
  • Receiver redundancy SRS
  • Channels 26
  • Servo sockets 22
  • Programmable servo outputs 22
  • Servo signal resolution 0,25µs
  • Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
  • Gyro sensor type external iGyro SAT
  • Number of sensor axes 12
  • Screen TFT 320x240 pixels
  • Integral door sequencer yes
  • Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott
  • Dimensions 107 x 69 x 19 mm
  • Weight 115g
  • Weight Sensor Switch 15g
  • Weight of LCD screen 34g
  • Temperature range -30°C to +105°C

 

Contents:

  • PowerBox Competition SR2
  • TFT Display
  • SensorSwitch
  • 2 patch-leads
  • 4 rubber grommets and brass spacer sleeves, factory-fitted
  • 8 retaining screws
  • Operating instructions in german and english





: *
: *
: *
 

PowerBox Royal SRS, 18-Channel, with LCD, GPS Sensor & Sensor Switch

PowerBox Royal SRS, 18-Channel, with LCD, GPS Sensor & Sensor Switch

PBS-4710

$815.99

PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch

 

PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch

PBS-4110

$543.50

PowerBox Champion SRS, 16+2-Channels, with LCD & Sensor Switch

PowerBox Champion SRS, 16+2-Channels, with LCD & Sensor Switch

PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch

PBS-4520

$543.50

PowerBox Pioneer, with Integrated iGyro

PowerBox Pioneer, with Integrated iGyro

PBS-4100

$217.00

PowerBox Evolution, with Sensor Switch & Patch Cables

PowerBox Evolution, with Sensor Switch & Patch Cables

PBS-4230

$217.00

PowerBox PowerExpander SRS, (Multiplex or Deans Connector)

PowerBox PowerExpander SRS, (Multiplex or Deans Connector)

PBS-3430

$140.50

Spot On 2" Servo Arm

Untitled Document

High Quality 2" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
 

 

SPO-SA-56b909934670e

$12.00

Lemon Rx DSMP (DSMX Compatible) 7-Channel Full-Range Telemetry With Diversity Receiver (Energy Meter) XT60 Package

Lemon Rx DSMP (DSMX Compatible) 7-Channel Full-Range Telemetry With Diversity Receiver (Energy Meter) XT60 Package

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. 4) Remove bind plug.

Failsafe Enable (Video showing 10-Channel receiver)

  1. Plug bind plug to the receiver.
  2. Provide power to the unit.
  3. Plug the side pushbutton for memorize current position in Failsafe mode.
  4. Green light will turn on at the bottom of the receiver to indicate Failsafe is successfully enabled.
  5. Remove bind plug

Failsafe Disable 

  1. Rebind the receiver without pressing the side pushbutton will disable the Failsafe mode.
  2. Green light off indicates Failsafe disabled.


 

LM-0051

$51.99

Enduro 1/10 Scale Trail Truck, Trailwalker 4x4 RTR

Enduro 1/10 Scale Trail Truck, Trailwalker 4x4 RTR

ASC40101

$299.99