Untitled Document

High Quality 2" Aluminum servo arm from Spot-On RC

Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose.  They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm.  Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance.

Spot on offers their servo arms in many sizes, threads and gear output compatibility.  Spot On arms are offered in:
M3, or #4-40 holes, so you can use ball links that are metric or standard Futaba, Hitec or JR compatible gear mesh. Sizes ranging from 1” to 2” for single arms and 2.5” to 4.5” for rudder arms.

Available colors are Black or Silver

Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center).  However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios.

Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design.  No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
 

Lemon Rx DSMP (DSMX Compatible) 7-Channel Full-Range Telemetry With Diversity Receiver (Energy Meter) XT60 Package

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

1. Plug bind plug to the receiver.
2. Provide power to the unit. LED flashes quickly.
3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
4. 4) Remove bind plug.

Failsafe Enable (Video showing 10-Channel receiver)

1. Plug bind plug to the receiver.
2. Provide power to the unit.
3. Plug the side pushbutton for memorize current position in Failsafe mode.
4. Green light will turn on at the bottom of the receiver to indicate Failsafe is successfully enabled.
5. Remove bind plug

Failsafe Disable 

1. Rebind the receiver without pressing the side pushbutton will disable the Failsafe mode.
2. Green light off indicates Failsafe disabled.

Enduro 1/10 Scale Trail Truck, Trailwalker 4x4 RTR