F3P Indoor Micro Flyer Power Pack 1408-1850KV Brushless Motor, ESC, Prop Combo

Contact UsCustomer Reviews

F3P Indoor Micro Flyer Power Pack 1408-1850KV Brushless Motor, ESC, Prop Combo

Our Price:

$32.99

Quantity (3)

Availability 3 in stock
Weight 1.00 lbs
SKU DW-MM1408A-P2

This Power Pack (Brushless Motor, ESC, Prop Combo) includes a high-end ADH100 PRO Brushless Motor that combines ultra-high power and super efficient design to deliver outstanding performance. Ideal motor for F3P Micro Flyers, Micro Heli, Indoor micro planes. One of our German customers said this is one of the best micro motors--A little screamer of an outrunner!
Weighing just 13grams and producing 202grams (7.1oz) of thrust, this motor is the next must have item for your indoor or micro flyer. 

  • Type:.........................1408-1850KV
  • KV(rpms per volt):.... 1850
  • Diameter: 18mm.
  • Length: 17mm
  • Shaft Diameter: 2mm Length: 7.5mm
  • No-Load Current: 7v @ .35A / 10v @ .43A
  • Suggested Prop; GWS 6030 w/ 11.1v & 3.6A Max (included)
  • Suggested prop produces the said 202g (7.1oz) thrust.
  • Cells:......................... 2-3S Li-Po
  • Weight:.......................13g / .45oz
  • Brushless ESC:......... 10A (Included)

Features:

  • Extremely low internal resistance
  • Super smooth and accurate throttle linearity
  • Power pack includes Motor, ESC, Prop and Prop Saver
  • Applicability: F3P, Micro Indoor Flyer or Micro Heli
: *
: *
: *
 

Z-Poxy 5 Minute Epoxy 4 oz. Set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

PAAPT-37

$11.99

Lemon Rx DSMX Compatible 10-Channel Diversity Antenna Receiver

Lemon Rx DSMX Compatible 10-Channel Diversity Antenna Receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. 4) Remove bind plug.

Failsafe Enable (Video showing 10-Channel receiver)

  1. Plug bind plug to the receiver.
  2. Provide power to the unit.
  3. Plug the side pushbutton for memorize current position in Failsafe mode.
  4. Green light will turn on at the bottom of the receiver to indicate Failsafe is successfully enabled.
  5. Remove bind plug

Failsafe Disable 

  1. Rebind the receiver without pressing the side pushbutton will disable the Failsafe mode.
  2. Green light off indicates Failsafe disabled.


 

LM-0040

$28.99

Male XT-30 to Female XT-60 Adapter

Male XT-30 to Female XT-60 Adapter 

 

Description:

Deans T Plug Female to XT90 Male Connector Adapter

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal

EX-XT30M-XT60F

$3.99