Power HD Storm 4 Brushless High Voltage

Contact UsCustomer Reviews

Power HD Storm 4 Brushless High Voltage

Power HD Storm 4 Brushless High Voltage
Power HD Storm 4 Brushless High Voltage
Power HD Storm 4 Brushless High Voltage
Power HD Storm 4 Brushless High Voltage
Power HD Storm 4 Brushless High Voltage
Power HD Storm 4 Brushless High Voltage
Power HD Storm 4 Brushless High Voltage
Power HD Storm 4 Brushless High Voltage
Market Price: $95.00
Our Price:

$85.00


You Save

11%

Quantity (14)

Availability 14 in stock
Weight 0.35 lbs
SKU HD-STORM-4
Manufacturer Power HD

 

 

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 4s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 4 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 4 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

So now the only question is - why are you still reading this? Go buy your Power HD Storm 4 servos before they're gone!

 

Specs:

  • Torque:
    • 291.6 oz/in at 6V (21.0 kg/cm)
    • 347.1 oz/in at 7.4V (25.0 kg/cm)
       
  • Speed:
    • .10 sec at 6V
    • .085 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm
  • Operating Temp - -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

 

 

: *
: *
: *
 

Talon 90 ESC

 

 

 

 

 

 

Overview

Castle's Talon 90 ESC with heavy duty BEC is designed for today's servos - producing 9 amps of continuous power and its potential power peaking* at 20 amps!

Fixed wing - applications drawing up to 90 amps continuously on 6S. BEC is capable of powering most servo sets in planes - Talon 90 is ideal for our 30cc planes! The innovative case ensures cooling in even the toughest mounting locations.

*Peak indicates amperage susatainable for 0.5 seconds - long enough for most servos' current draw transients. Your setup may vary. Always confirm servo current draw befire the first flight.

Specs

Amperage: 60 & Up
Auto Cutoff: Programmable
BEC Voltage: 6V or 8V, user selectable; 9A continuous, 20A peak output
Brake: Programmable
Continuous Maximum Current: 90A
Height: 0.7 in (18mm)
Input Connector Types: Bare wire
Input Voltage: 3S-6S LiPo
Length: 3.14 in (80mm)
Output Connector Types: 5mm female bullets
PWM Frequency: Programmable
Type: Brushless
Weight: 3.0 oz (84.5 g)
Width: 1.7 in (43mm)

 

  • On-board selectable six-or eight-volt BEC
  • Adjustable low-voltage cutoff
  • Adjustable brake type
  • Adjustable PWM switching rate
  • Innovative case provides fan-free cooling
  • Works with 3S-6S LiPos

 

 

CCTALON90

$109.95

MKS-X8 Hub Set

MKS-X8 Hub Set

Horn set includes 2 X8 (8mm) Hubs and hardware
 
For use with X8 8mm Servos
HBL380, HBL850, HBL880 and HBL860

MKS-X8-HubSet

$14.95

Sopwith Camel 1.2M 1200mm (47.2") Balsa Wood Kit Electric Aircraft

Sopwith Camel 1.2M 1200mm (47.2") Balsa Wood Kit Electric Aircraft

DW-S30-Camel-1.2MKit

$159.99