Beechcraft T-34 Mini 470mm Laser-Cut Balsa Wood Model Kit (Kit, PNP or BNF Electric Power version)

Contact UsCustomer Reviews

Beechcraft T-34 Mini 470mm Laser-Cut Balsa Wood Model Kit (Kit, PNP or BNF Electric Power version)

Market Price: $74.90
Our Price:

$55.99

You Save

25%

 

FREE SHIPPING

Kit Versions
Quantity (4)

Availability 4 in stock
Weight 1.30 lbs
SKU DW-K1301

Beechcraft T-34 Mini 470mm Laser-Cut Balsa Wood Model Kit (Kit, PNP or BNF Electric Power version) 

The Beechcraft T-34 Mentor is an American propeller-driven, single-engined, military trainer aircraft derived from the Beechcraft Model 35 Bonanza.The earlier versions of the T-34, dating from around the late 1940s to the 1950s, were piston-engined. The T-34 was the brainchild of Walter Beech, who developed it as the Beechcraft Model 45 private venture at a time when there was no defense budget for a new trainer model. Beech hoped to sell it as an economical alternative to the North American T-6/SNJ Texan, then in use by all services of the U.S. military..

Our model captures the very essence of this early fighter aircraft. This Micro Balsa plane is built from balsa and hardwoods with all the parts beautifully laser cut that are extremely accurate allowing you to build the perfect model. This kit is easy to operate and suitable for beginners and the PNP comes with everything you need except your battery and RX/TX. BNF includes 2 batteries and charger plus DSMX Receiver!

Features:

  • Accurate laser cutting parts for easy construction
  • Premium balsa and plywood materials
  • High performace power system
  • Equipped with comprehensive hardware pack
  • Micro balsa wood plane perfect for indoor and park flyer
  • Suitable for beginners and seasoned pilots
  • Enjoyable to build and fun to fly!

Specifications:

  • Wingspan: 470mm
  • Length: 335mm
  • Flying Weight: ≈30-35g
  • Radio: 4CH

Optional Power System:

  • Motor: 1104 3700KV (included in PNP)
  • ESC: 5A /1S (included in PNP)
  • Servo: 1.7g * 3pcs (included in PNP)
  • Propeller: 4.5-5.0" (included in PNP)
  • Battery: 1S 150-250mAh and charger (included in PNP+)
  • Receiver: MINI RX144 (DSMX/2) (included in BNF version)
  • Transmitter: 4Ch or greater (Not included)
Kit Versions:
K1301= KIT only
K1302= KIT+Motor(1104 3700KV+1.5mm Prop Saver+5030 Prop+2.0 Pin 3P)
K1304 (PNP)= KIT+Motor+ESC( 1S7A+2.0Pin 3P+Walkera Female 2P+1.25P 2pin)+Servo(1.7g*2)
K1305 (PNP+)= K1304+2pcs*1S 100mAh Battery+USB Charger
K1305-144 (BNF)= K1305+Mini Receiver RX144 (DSMX/2)
 
Free shipping lower 48 USA only. Contact us at [email protected] for international shipping
: *
: *
: *
 

DLE 20cc Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
Glow power isn't the only option anymore. The DLE-20 not only fills the displacement gap, but includes a beam mount to make the glow-to-gas upgrade drop-in fast and easy. A rear pumper carb simplifies installation and adjustment of the DLE 20cc. A generous package of "extras" and electronic ignition for starting ease and top performance make the DLE 20 an attractive alternative to glow…and a solid buy for value and performance.

We supply a free 2 year warranty with our DLE 20, and also back it with our in house repair of DLE engines.



Download DLE 20 Manual



Specifications:

  • Stock Number: DLEG0020
  • Displacement: 20 cc (1.22 cu in)
  • Bore: 1.3 in (32 mm)
  • Stroke: 1.0 in (25 mm)
  • Weight: 28.9 oz (820 g)
  • RPM Range: 1,750-9,000
  • Output: 2.5 hp @ 9,000 rpm
  • Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
  • Includes: electronic ignition, muffler, spark plug, gasket, bolts, throttle arm extension & manual
  • Suggested Propellers: 16x8 17x6
  • Suggested Break-in Prop: 16x8
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 10.5:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 22.9 oz (650 g); Muffler: 1.8 oz (50 g); Ignition: 4.2 oz (120 g)
  • Recommended Propeller: Hawk "C" type 17x6 (for 3d), 16x8 (sport/pattern)

 

 

RedwingRC Pre-Run
DLE 35ra DLE55


 

 

DLE-20

$249.99

SmartDesign V3 "Trouble Free" Tail Wheel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

 


 

Features:

 

  • Extremely Reliable
  • Mechanically Efficient Design
  • Simple and Solid Construction
  • Fewer parts needed for install
  • Ball Bearings

 

Pricing

 

  • 20-40cc: $27.00
  • 50-70cc: $34.99
  • 85-120cc: $44.99
  • 150cc-220cc: $54.00

 

 

Weight

 

 

  • 20-40cc: 1.2 oz
  • 50-70cc: 1.6 oz
  • 85-120cc: 2.2 oz
  • 150cc-220cc: 2.6 oz

Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.

Tail Wheel Chart

GW-KAGC-112

$54.99

Miracle 3 Way T Joint with Fuel Filter

Miracle 3 Way T Joint with Fuel Filter

Miracle long fuel filling nozzle with fuel filter.
Available in Red, Gold, and Blue.
Please make a note of your color choice.

MRC-H-010

$5.00