A-10 Thunderbolt 50mm EDF Jet PNP

Contact UsCustomer Reviews

A-10 Thunderbolt 50mm EDF Jet PNP

Our Price:

$249.99


Quantity

OUT OF STOCK


Availability No items available
Weight 5.00 lbs
SKU XF65602

A-10 Thunderbolt 50mm EDF Jet PNP, RedwingRC Plug-and-Play aircraft! 

A-10 Thunderbolt II also known as 'The Warthog' is an American single-seat, twin-engine, straight-wing jet aircraft designed to provide close air support of ground forces. The A-10 earned its reputation as the 'Tank Buster' with its assortment of lethal air to ground armaments effectively annihilation enemy ground forces and reinforcements. It was the first USAF aircraft designed exclusively for close air support.

The A-10 has been an awesome flying machine in the Redwing RC Fleet. The A-10 has superb maneuverability even at low speeds and altitude, which is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. The package comes 90% Ready To Fly, just add your choice of TX/RX and battery. All Servos, motors and other electronics are preinstalled from factory. The XFly A-10 Thunderbolt II twin 50mm EDF jet. Powered by a single 4S 2200mAh-2600mAh, the 4S-compatible brushless motors and 40-amp ESCs that are matched to two 12-blade 50mm fans produce an abundance of top speed and thrust compared to other models in its class, while also delivering a wide range in flight times.

What is included:

  • PNP-- A-10 airplane, motor, ESC, 4*9g servos

What is required (PNP):

  • 4-Channel or above transmitter
  • 4-Channel receiver
  • 4S 2200-2600mAh Li-Po battery and charger

Specifications:

  • Material: EPO Foam
  • Wing Span: 1000mm( 39.4in)
  • Flying Weight: 1.2kg (2.7lb)
  • Wing Loading: 74 g/dm      
  • Fuselage Length: 920mm (36.2in)
  • Center of Gravity: 45mm from the leading edge of the wing at the root
  • Motor: 2627 KV 4600x2
  • ESC: 40A ESC 2pcs
  • Propeller: N/A
  • Servo: 9g*4pcs
  • Elevator: Yes
  • Rudder: No
  • Ailerons: Yes
  • Flaps: No
  • Landing Gear: Fixed

1 hour assembly time

$20 Flat Rate shipping lower 48 only. Contact us at [email protected] for international shipping cost. 


: *
: *
: *
 

Power HD R-12S Competition Low Profile Digital HV High Speed Steering Servo (12kg/166.6oz 0.06sec 7.4V)

Power HD R-12S Competition Low Profile Digital HV High Speed Steering Servo (12kg/166.6oz 0.06sec 7.4V)

Description:

The Power HD 1206TG is excellent low profile digital servo that has metal housing around the middle which allows for heat to rapidly dissipate. With double ball bearings you will have smooth movement and powerful torque when you need it. You cant beat the performance of this servo and at such a great price it's a no-brainer.

 

Specs:

  • Torque:
    • 83.3 oz/in at 4.8V (6.0 kg/cm)
    • 97.20 oz/in at 6V (7.0 kg/cm)
       
  • Speed:
    • 0.07 sec at 4.8V
    • 0.06 sec at 6V
       
  • Voltage: 4.8 ~ 6.0 DC Volts
  • Weight: 1.69 oz (48 g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • Coreless Motor
  • Middle Aluminum Casing With Plastic Top and Bottom
  • Double Ball Bearings
  • Copper & Aluminum Gears

HD-R12S

$49.99

5.0" Painted CF Spinners

5.0" painted carbon fiber spinners!

These are great for putting the finishing touches on your plane and giving it that scale appearance.

  • Avalable Colors:
  • Red

SP-CF-P-5.0

$89.99

1 Meter Balsa Wood Sheets (1-10mm Thick)

1 Meter Balsa Wood Sheets  (1-10mm Thick)

Please contact us for information on if your plane is using Ultracote, or TruCote before ordering if you are unsure

Description:
TruCote covering is a high tech polyester covering that is sensative to heat which makes it easy to apply to your plane. It offers high adhesion, fuel proof/waterproof covering for your plane. Easy to apply using a heat gun and/or iron.

  • Specs:
  • Width: 23.5”
  • Temp to adhesion: Approximately 250 degrees F
  • Shrinkage begins: Approximately 275 degrees F
  • Maximum recommended temp: Approximately 300 degrees F


For instructions on how to apply covering here is a helpful tutorial:

http://www.rc-airplane-advisor.com/heat-shrink-covering.html


Sold in 1 Foot Sections. Please select how many feet you want.

Please put what plane this is for at checkout so that we can match it!

VP-Balsa sheets

$2.50