SRXL2 TO SMOOTHFLITE ADAPTOR CABLE 400MM

Contact UsCustomer Reviews

SRXL2 TO SMOOTHFLITE ADAPTOR CABLE 400MM

Our Price:

$7.99


Quantity

OUT OF STOCK


Availability No items available
Weight 0.20 lbs
SKU BRC-857

SRXL2 TO SMOOTHFLITE ADAPTOR CABLE 400MM

This is the 4 pin to 3 pin cable you need to connect Spektrum SRXL2 (SPM4651T) receivers to Smooth Flite ARXL and SF16. Please note this cable is specific to the new high voltage version (SPM4651T) satellite receivers.  



: *
: *
: *
 

50cc Extra "Prince Graphics" Set - Green

Deluxe "Prince Graphics"

graphics-50-Extra-Prince-G

$89.00

NEW

SmoothFlite 16 ML

Special Order item allow 3-4 weeks for delivery

SmoothFlite 16

Welcome to the world’s first Automatic Intelligent Servo Matching System (ISMS)

Intellimatch is the result of 2 years of research and development, is designed to take the worry out of servo matching and gives you the maximum power, smoothest response and increased life from your servos.

If you have built giant scale models before with multi servo control surfaces then I am sure you will be familiar with the process of manually matching the servos. You generally match servos on 2 end points and maybe a center point. That’s a total of only 3 matching points. There is no way 3 points will accurately match your servos. Also, you have to adjust each servo until minimal buzz is heard or you might use an ammeter to minimize current draw. Throw that idea away...

With the Booma RC Intellimatch you say goodbye to traditional methods of servo matching. The Intellimatch system automatically matches servos on 100 points through the servo sweep range. That is 100 points not just the traditional 2 or 3. Intellimatch further adds smoother operation by reading the closest 2 points from the servos current position and then interpolates between the 2 selected points to a resolution of 8192 steps. 8192 step resolution is the highest resolution available today.

The IM14 Intellimatch unit is designed to match 1 set of up to 4 servos. An example IM14 usage might be up to 4 rudder or ailerons servos

Read on for the full list of features




Model Example 1 - 100cc Scale Aero Model:

-2 Aileron Servos per aileron

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories

-2 x IM22 = 1 x IM22 for Ailerons and 1 x IM22 for Elevators

Model Example 2 - 150cc Scale Aero Model:

-3 Aileron Servos per aileron

-2 Elevator Servo per elevator

-3 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = 1 x IM22 for Elevators

-2 x IM14 = for Ailerons

-1 x IM14 = for Rudder

Model Example 3 - Large Jet:

-2 Aileron Servos per aileron

-2 Flap Servos

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = for right side Ailerons and Flaps

-1 x IM22 = for left side Ailerons and Flaps

-1 x IM22 = for Rudder

 

 

Specs:

 

 

  • 32 bit Processor for the highest speed and resolution in the industry
  • Automatic matching of up to 4 servos on a single channel
  • 100 matched point across the servo sweep range
  • 82 step real time interpolation between the 100 matched points
  • PWM resolution of up to 8200 steps
  • Dual LED indication for programming feedback
  • Recommended battery chemistry - Life (2 cells), LiPo (2 cells), Lion (2 cells), NiCd(5cells),Nimh(5 cells)
  • Maximum input voltage 10 volts
  • Minimum input voltage 5 volts
  • Compatible with all receivers and Power Distribution systems
  • Works with Advanced Radio AR1232 and AR824. Also compatible with all other receiver and Power Distribution systems
  • Dual fail safe arming with the supplied arming plug
  • On board Flash storage - 100 year data retention
  • Weight is only 12 grams
  • Dimensions 49mm x 23mm (3.5 x 2.5 inches)

 

Custom Upgrades can be ordered (typically 3-4 weeks) 
Power Switch option:
Standard Pin and Flag Switch, or for a slight cost can upgrade to a Remote Switch or Magnetic Switch 

 

BRC-875

$339.00

GliderCG Throw Meter and Wing Incidence Tool (Multi-Purpose Digital Angle Throw Meter, measure the dihedral angle of a wing, measure incidence angles, etc.)

GliderCG Throw Meter and Wing Incidence Tool (Multi-Purpose Digital Angle Throw Meter, and can measure the dihedral angle of a wing, measure incidence angles, etc.) 

Here is a video demonstrating GliderThrow in use.

GliderCG Standard V3 (Center of Gravity (CG) digital balance device, Designed for F5J, F3B, and F3F Gliders, Works on all RC model airplanes!)

Based on the original development of Olav Kalhovd, GliderCG is a center of gravity (CG) digital balance device for RC planes able to provide the exact information of where the CG is located on the aircraft via a display which also provides information of the aircrafts's total weight.

Simply place the aircraft/sailplane on the scale and obtain it's CG without trying to balance it on your fingers or mark the wings to supporting them on precarious structures.

Once the aircraft/sailplane is placed on the scale, you can vary the CG by moving e.g. the battery and GliderCG will automatically inform you of the new CG in real-time.  Easy and simple!

The GliderCG family was born with the aim of being able to transfer the concept of digital measurement of the CG to the different types of aircraft and radio control gliders. For this reason there is a specific device for each of the different popular disciplines: GliderCG F3K/DLG, GliderCG Standard, GliderCG Plus and GliderCG Scale. There is a device that will work on all RC aircraft.

GliderCG is constantly being improved and has evolved over time to provide more features and enhancements. Today's GliderCG devices are much more modern and advanced than the initial ones produced in 2018.

Based in the GliderCG v2 platform and with the constant desire for improvement, development on all aspects of the device, both hardware and software, to offer an improved device in a compact form factor for easy transport and storage when not in use.

This model is designed for F5J, F3B, and F3F models however will work on all RC model airplanes meeting the weight and dimension limits below listed in specifications.

FEATURES

  • Folding arms with solid locking mechanism
  • Battery level indicator (WiFi Interface)
  • Sliding lid access to the battery compartment
  • Greater stability
  • WiFi + OLED LCD display

Additionally, this unit provides the ability to view data through the WiFi connection. The WiFi connection also provides the option to save the CG configuration of different models to review historical readings and the ability to compare readings after e.g. repairs, etc.

GliderCG Standard v3 includes a set of smaller wing adapters to allow the measurement of planes with a narrow wing chord (i.e. DLG/F3K models).

Stacks Image 65

SPECIFICATIONS

  • Maximum weight: 17.6 lbs / 8 kg
  • Maximum fuselage width: 3.4 in
  • Maximum fuselage height (from bottom fuselage to wing bottom): 3.4 in / 86 mm
  • Leading edge to rear support pad distance: 5.9 in / 150 mm
  • Power: 9V DC (6LR61)


DOCUMENTATION

FREE Shipping for USA only. Contact us at [email protected] to calculate international shipping cost.

CG-Throw Meter

$189.00