DLE 120Engine - DLE120

Contact UsCustomer Reviews

DLE 120Engine - DLE120

DLE 120Engine - DLE120
DLE 120Engine - DLE120
DLE 120Engine - DLE120
DLE 120Engine - DLE120
DLE 120Engine - DLE120
Market Price: $849.99
Our Price:

$799.00


You Save

6%

Quantity (6)

Availability 6 in stock
Weight 5.00 lbs
SKU DLE-120

Available now with the 100-120CC Extra 330 SC!!! Pre-covid pricing $50 below the competition!

$20 Flat rate Shipping (Continental US only!) If international customer, please contact us at [email protected] for shipping quote. You will be charged separately for shipping.

Giant-scale enthusiasts will love the power, performance and value of the DLE-120cc. This thing is a MONSTER! The DLE 120 delivers 50 pounds of static thrust - MORE than enough power for the most intense 3d maneuvers. Plus the twin cylinders are always a plus - reducing the vibration and engine wear and tear AND increasing overall performance.

The DLE 120 deivers the most punch and power at the lowest weight and price of any other engine in its class - who can say no to that?!

DLE 120 Mounting Template

Specifications:

  • Displacement: 120 cc (7.3 cu in)
  • Bore and Stroke: 1.85in x 1.38in (47mmx35mm)
  • Weight: 6.13 lb (2.781 kg)
  • Output: 12 hp @ 7500 rpm
  • Static Thrust:
    • @ 328ft altitude - 20.9 lb Pulling Force (9.5kg)
    • @1800ft altitude - 18.7 lb Pulling Force (8.5 kg)
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & mounting template
  • Suggested Propellers: 26x10, 26x12, 27x10, 28x10
  • Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: DLEG1326
  • Weights (individual): Engine: 5.08 lb (2306 g); Muffler 1: 3.6 oz (103 g); Muffler 2: 3.9 oz (111 g); Ignition: 5.3oz (149 g); Misc: 4 oz (112 g)

Features:

  • Two crankshaft bearings-simple design for lighter weight
  • Aluminum alloy crankcase
  • Four petal V-type reed valve bottom induction system
  • Walbro carburetor
  • Fully automatic electronic ignition
  • Two year limited warranty
  • INCLUDES: Engine, spark plug, standoffs, ignition, muffler, instruction manual
: *
: *
: *
 

DLE 61

DLE 61

 

 

 

 

 

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
Looking for a quality 61cc gas engine with a light design for high power-to-weight ratio? Maybe even one with a light piston for fast acceleration, excellent compression AND low vibration? Well - then you want to get a DLE 61 gas engine from Redwing RC!

DLE has made even more improvements to their engines including magnesium alloy crankcases, imporoved crankshaft bearings and a better cylinder to fit their engines! You can't get a more durable, long-lasting engine for your 50cc planes for the price!

The DLE 61cc Gas Engine comes with the same great features and services as our other DLE engines. We'll do most of the work for you - have yours pre-run!

DLE 61 Mounting Template


Specifications:

  • Displacement: 61.0 cc (3.7 cu in)
  • Bore: 1.85 in (47 mm)
  • Stroke: 1.38 in (35 mm)
  • Total Weight: 3.65 lb (1655 g)
  • Output: 6 hp @ 7,500 rpm
  • Includes: Electronic ignition module, muffler, spark plug, standoffs, spiral wire wrap, connector safety clips.
  • Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
  • Suggested Propellers: 22 x 10, 23 x 8, 23 x 10, 24 x 8
  • Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM-6
  • Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude, 18.7 lb (8.5 kg) @ 1,800 feet altitude
  • Weight Breakdown: Engine: 2.8 lb (1273 g), Muffler: 3.9 oz (110 g), Ignition Module: 3.9 oz (110 g)

 


RedwingRC Pre-Run
DLE 35ra DLE55
 

DLE-61

$499.99

RC Gadgetz Edge 540 PNP

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

RCG-Edge-540

$429.00

Venom Balance Board with Extra Long 24" Leads (JST-XH 2s-6S) (Good for Bat Safe and other charging boxes)

Venom Balance Board with Extra Long 24" Leads (JST-XH 2s-6S)

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Bal-Board-JST-XH-extra-long

$8.99