Tiger Moth 980mm 38.6" Wingspan 4CH Laser-Cut Wood Model Kit (PNP Electric Power version)

Contact UsCustomer Reviews

Tiger Moth 980mm 38.6" Wingspan 4CH Laser-Cut Wood Model Kit (PNP Electric Power version)

Market Price: $129.99
Our Price:


You Save




Kit Versions
Radio Combo
Charger Combo
Quantity (3)

Availability 3 in stock
Weight 3.50 lbs
SKU DW-S1904

Tiger Moth 980mm 38.6" Wingspan 4CH Laser-Cut Wood Model Kit (PNP Electric Power version)   

The de Havilland DH.82 Tiger Moth is a 1930s British biplane designed by Geoffrey de Havilland and built by the de Havilland Aircraft Company. It was operated by the Royal Air Force (RAF) and many other operators as a primary trainer aircraft. In addition to the type's principal use for ab-initio training, the Second World War saw RAF Tiger Moths operating in other capacities, including maritime surveillance and defensive anti-invasion preparations; some aircraft were even outfitted to function as armed light bombers. 

For those modelers that enjoy building kits or building from scratch this balsa and wood, Tiger Moth Kit is an ideal model. With a wingspan of 980mm, it isn’t too big to fit easily in your car and you can remove the wings. The kit comes with plans and an easy to follow the build guide. 

All parts are laser cut to ensure that they easily fit together. It also comes with carbon fiber wing spars and other tubes, wire undercarriage and a plastic cowl. You will need covering film for your choice of color and an electric power system and a 4-channel radio system. The recommended power system is a 2212~2216 1000~1400KV brushless motor with 20~30A ESC and 1800~2200mAh 3S Lipo battery spinning an 8~9inch propeller.

Like all Tiger Moths, this plane is easy to fly but has that extra challenge that all biplanes have exhibit rudder is needed with ailerons for turning. Enjoy the experience of building and flying this magnificent biplane.

• Accurate laser cut balsa wood kit
• Removable wings
• Small size for transportation
• Easy to fly

  • Wingspan: 980mm (38.6")
  • Fuselage Length: 812mm
  • Flying Weight: 700g


  • Radio: ≥4CH (Jumper T16) see combo pricing
  • Motor:2212 1100KV brushless motor
  • ESC: 20A
  • Servo: 9g x4 (See all RedwingRC Servos)
  • 8-9 inch Propeller
  • BATT: 3S 2200mAh (NOT included) (see all RedwingRC batteries/chargers)
  • Battery Charger:(Not incl.)  Pulse Balance Charger (PLC100) see combo pricing
Kit Versions:
  • S1901=KIT only
  • S1901B=KIT+Film (4M Yellow)
  • S1904=KIT+Motor+ESC+Servos
  • S1904B=KIT+Motor+ESC+Servos+Film (PNP version)
FREE Shipping US only--contact us at [email protected] to calculate international shipping cost

: *
: *
: *

Power Board - PRO SERIES - Black (4106)

Power Board - PRO SERIES - Black (4106)






































All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.


Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.


These new versions offer SEVERAL new features:
1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
3) TOUCH button programming to select your warning voltage
4) Wires to your RX are PRE-installed
5) Enclosed lightweight and strong plastic housing
6) XT-60 Connectors



The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.


They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

Watch this video for an overview of the different versions

View this video for a full explanation on how to use these power boards


Black Power Board (4106)

  • Dual battery redundancy for safer flying
  • LCD display which shows real time info of your in and out voltages
  • Built in regulator that supplies a clean 5v to your receiver
  • Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
  • 8 channels in, 16 channels out (+ ignition)
  • Electronically isolated for interference free flying
  • Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
  • Ability to use High voltage servos while providing a clean 5v to your RX
  • Battery balancing (draws extremely evenly from your dual battery set up)
  • Short Circuit protection (in the unlikely event of a short it will protect from battery drain)

    (input voltage MUST be between 6-13v. A 4S Life would be ideal)


Black Power Board (4106)

  • Input Voltage: 6-13v
  • Working load: 0A to 30A
  • Weight: 4.5 oz.
  • Dimensions: 4.5"x2.5"x5/8"
  • Working Temperature: -20c to -85c

Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger.



ManiaX Power LiPo 3S 2300mAh 11.1V eXtreme Series 70C

ManiaX LiPo 3S 2300mAh 11.1V eXtreme Series 70C 




Savox SW-1210SG Waterproof, HV, Brushless, Digital Servo 0.13 sec / 444.4oz @ 7.4V

Savox SW-1210SG Waterproof, HV, Brushless, Digital Servo 0.13 sec / 444.4oz @ 7.4V  








Savox SW-2210SG Waterproof, HV, Brushless, Digital Servo 0.11 sec / 500oz @ 7.4V 

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider - the Savox SA-1231.

The Savox SA-1231 servos are a more powerful, high torque, coreless digital servo that can fit every control surface for giant scale aircrafts - while still being super lightweight, 20% lighter than its kind! Sounds great - right?! These servos combine leading edge technology with super high 12 bit resolution and super strong unique steel gears.

The coreless motor ensures high speed, incredible efficiency and LOW POWER CONSUPTION - so no "hungry hungry servo" sucking away your battery life - also allowing cooler and smoother operating temperatures. So chill out!

You can trust that these SA-1231 servos are a perfect match for your large scale model because they are especially designed to handle the stresses of large scale flying. Whether is be jet, 3D or scale - these servos take on the stress so you don't have to!

All in all - these servos are a great choice for your RC plane. Order yours now!



  • Torque:
    • 389 oz/in at 4.8V
    • 444.4 oz/in at 6V
  • Speed:
    • .18 sec at 4.8V
    • .14 sec at 6V
  • Voltage: 4.8V to 6V
  • Weight: 2.78 oz (79g)
  • Size: 1.58 x .79 x 1.77 in (40.3 x 20.2 x 45 mm)
  • Gear Type - Unique Steel
  • Case - Full Aluminum
  • Bearing - dual ball bearings
  • Frequency - 250-333hz
  • Output Shaft - 25 Tooth Spline