FUTABA 4YF 4-Channel 2.4GHz FHSS Stick Radio System w/ R2004GF Receiver

Contact UsCustomer Reviews
  0  
  4. FUTABA 4YF 4-Channel 2.4GHz FHSS Stick Radio System w/ R2004GF Receiver
It is that time year with RC Events--Redwing RC Office will be closed 4 May-11 May. Orders can still be accepted during these times and will be processed in the order received. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you when we return.
more offers

FUTABA 4YF 4-Channel 2.4GHz FHSS Stick Radio System w/ R2004GF Receiver

Ask a question about this product
Printable version

Share

Options

Market Price: $199.99
Our Price:

$119.99
You Save

40%
 

FREE SHIPPING
Quantity (10)

Details

Availability 10 in stock
Weight 3.00 lbs
SKU HRP-FUT01004361-3

4YF 4-Channel 2.4GHz FHSS Stick Radio System w/ R2004GF Receiver 

Features:
-FHSS (Frequency Hopping Spread Spectrum) eliminates frequency pins
and signal interference
-Pushbutton transmitter/receiver linking, with no binding plugs 
-R2004GF receiver has coaxial antenna that can be positioned inside model for optimum reception 
-Power Down Mode - reduces RF power for 90 seconds, simplifying ground checks for interference 
-All-channel servo reversing for more installation options.
-Power and servo reversing switches are located down and out of the
way for convenience and to avoid accidental changes
-Battery meter features one green and one red LED for easy-to-read GO/NO GO status
-Does not have battery failsafe function 
-Elevon mixing
-Gimbals have knurled tops for a better "feel" on the sticks and to prevent finger slippage 
-One year limited warranty through the Futaba USA Service Center beginning at date of purchase.

Transmitter:
Transmitting Frequency: 2.4GHz band
Power Requirement: Four AA cells
Current Drain: 90mA
Trainer Port: Micro

Receiver:
Power Requirement: 4.8 - 6V shared with servo
Current Drain: 30mA at no signal
Size: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.49oz (14g)

Requirements: 
AA Batteries: Four for transmitter
Servos depending on application
Receiver battery pack depending on application 


: *
: *
: *
 
TAFT-HOBBY VIPER V3 90MM EDF JET 6S PNP YELLOW VERSION

TAFT-HOBBY VIPER V3 90MM EDF JET 6S PNP YELLOW VERSION

TAFT-HOBBY VIPER V3 90MM EDF JET 6S PNP VERSION 

TH-Viper-Yellow

$449.99

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0086T

$41.99

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and JST 2.54MM CONNECTOR PACKAGE

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and JST 2.54MM CONNECTOR PACKAGE

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and JST 2.54MM CONNECTOR PACKAGE

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0070JST

$48.00


Back to Top