Triplane Fokker DR.1 1.54M Wingspan Laser-Cut Wood Model Kit
Specification: Wingspan: 1540mm Length: 1305mm Flying Weight: ≈3.3-3.8kg Radio: more than 4CH Power System (Included): Motor: 3520 500-800KV ESC: 60A 3-6S Servo: 17g * 4pcs Propeller: 13-16 in Battery: 3-6S 3300-6000 mAh (Not incl.) Optional models as below: S1801= S18 Fokker-DR1 (1.54M) Kit only S1801B= S18 Fokker-DR1 (1.54M) + 8M Red Film S1802= S18 Fokker-DR1 (1.54M) +Motor(3520 650KV+3.5mm Banana Male+Female Plug+14inch Prop+16 inch Prop+Adapter) S1804= S18 Fokker-DR1 (1.54M) +Motor+ESC+Servo(17g*4) S1804B =S18 Fokker-DR1 (1.54M) +Motor+ESC+Servo+8M Red Film $20 Flat Rate Shipping US only*** contact us at [email protected] for international shipping cost |
Spot On Cap Bolt Washers
| High quality cap bolt washers. Available in two sizes that can fit M3/ #4-40 threads or M4/#8-32 threads |
SPO-WACB-
$8.99
Biodegradable Performance Plus Clear Cleaner and Degreaser
|
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
TAE4700
$8.99
Gloster Meteor Twin 70mm EDF Jet
| Description: RedwingRC Plug-and-Play aircraft! Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with twin powerful Brushless Electric Ducted-Fans. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.
Key Features:
Specifications:
|
DY37661
$399.99
