Metal Clevis With Solid Brass Screw (10 pcs)

1/3 Scale Nieuport 28 (Giant Wingspan 111" 2825mm)

DE HAVILLAND TIGER MOTH SCALE 1:3,8 (wingspan 93" 2360mm)

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

• Torque:
  • 143 oz/in at 4.8V (10.3 kg/cm)
  • 168 oz/in at 6V (12.1 kg/cm)
     
• Speed:
  • .23 sec at 4.8V
  • .18 sec at 6V
     
• Voltage: 4.8V - 6V
• Weight: 2.11oz (59.82g)
• Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
   
• Motor Type: 3 Pole Ferrite
• Bearing Type: Dual Ball Bearing
• Gear Type: 3 Metal Gears and 1 Resin Metal Gear
• Connector Wire Length: 11.81" (300mm)
• Control System: +Pulse Width Control 1500usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Temperature Range: -20 to +60 Degree C
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• 360 Modifiable: Yes
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Dead Band Width: 8usec
• Potentiometer Drive: Indirect Drive
• Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
• Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

Features:

• Extremely Reliable
• Mechanically Efficient Design
• Simple and Solid Construction
• Fewer parts needed for install
• Ball Bearings

Pricing

• 20-40cc: $27.00
• 50-70cc: $34.99
• 85-120cc: $44.99
• 150cc-220cc: $54.00

Weight

• 20-40cc: 1.2 oz
• 50-70cc: 1.6 oz
• 85-120cc: 2.2 oz
• 150cc-220cc: 2.6 oz

Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.

Brass Collet with Tension Screw and Pin