Canister Muffler (Rear Exit) Curved Header 20-30cc Engine

Contact UsCustomer Reviews

Canister Muffler (Rear Exit) Curved Header 20-30cc Engine

Market Price: $89.99
Our Price:

$59.99


You Save

33%

Quantity

OUT OF STOCK


Availability No items available
Weight 1.00 lbs
SKU Rear Canister Muffler 20-30cc

Canister Muffler (Rear Exit) Curved Header 20-30cc Engine
High quality exhaust Canister Muffler with Tuned Pipe for 20-30cc engine is easily connected to the engine without adding much extra weight. The canister will significantly reduce the nosie of the engine, and also allow you to keep from having to cut your cowl as much as a front muffler. Well suited for ZENOAH 26CC, CRRCPRO26CC, DLE30CC, and DLA32CC.

This muffler is designed with three levels of filters for the best sound dampening effect and feautures an oil proof converted silicone tube on the end of the muffler. The design makes this muffler very convenient for users to install them on engines.

Secure connection is ensured by the anti-skid joint on the muffler and the included installation clips.

The muffler is made of soft aluminum and is brushed into frosted texture.

Works even better than before at low to medium speeds.

Fast response.

Strong and light weight pipe.

Easy installation.

Includes mufflers, tubes, and clips.


SPECS:
See photos for dimensions

: *
: *
: *
 

RCGF 20CC Twin Stinger Gas Engine

RCGF 20CC Twin Stinger Gas Engine 

 

RCGF-20cc-Twin

$375.99

CESSNA 182 (500 Class) 55IN (1410mm) 6CH WITH FLAPS AND LED LIGHTS (EPO FOAM) PNP

$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.

RedwingRC Plug-and-Play aircraft!

The Dynam T28 Trojan is a great plane for both beginners and experienced pilots! Just getting started in the hobby or just want to try something new, this plane is for you. The Trojan T28 is made with EPOFLEX (EPO) foam- a damage resistant foam. This aircraft is painted with the famous US Air force color scheme. All surfaces are constructed out of the EPO foam so it is not easily damaged and easily repaired. The Trojan is very stable and is a blast to fly! This is a Plug-and-Play aircraft so it will arrive about 80% complete and included cool scale features such as a clear canopy, retractable landing gears and steerable nose landing-gear .

Build time is around 60 min from box to air.

Expect flight time to be from 6-10 minutes per battery.

 

Key Features:

  • Powerful BM3715 - 890KV outrunner brushless power system
  • 30A Brushless ESC
  • Retractable landing gears
  • Durable and lightweight EPO construction with many surface details
  • Detailed Body Structure
  • Suitable for both, beginner thru experienced Pilots
  • Easy to build
  • Scale 3 blade prop


Specifications:

Wingspan: 50 inch (1270mm)
Overall Length: 39.37 (1000mm)
Flying Weight: 47.61 (1340g) w/Battery
Motor Size: BM3715A-KV890 (installed)
Propeller: 3 Blade - 11 x 7 x 3
Radio / Transmitter 5 Channel Required - NOT INCLUDED
Servos: 4 servos installed ( 4 x 9g )
Speed Control : 1 x Dectrum 30A Brushless
Battery: 11.1V 2200 mah LiPo 20C (Not Included)
Charger: NOT INCLUDED basic 2S - 3SS lipo charger
Flight Times Average (6-10 mins)
Assembly Time

Approx  60min

 

 

 


 

Top-094B-cessna182

$225.00

Power HD B7RS Brushless Servo - 13.0 kg/cm (180.5 oz/in), 0.05 sec 8.4V - (Programmable Low Profile and Ultra High Speed)

Power HD B7RS Brushless Servo - 13.0 kg/cm (180.5 oz/in), 0.05 sec 8.4V - (Low Profile and Ultra High Speed)

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B7RS

$85.99