SCORPION TRIBUNUS III 06-110A ESC SBEC

This airframe is currently out of stock. No current ETA on a new shipment.”
 

Description:
The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 50cc version of the Slick 540 was built with those expert modifications in mind. The 50cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable.

This 50cc Slick is suited for both 3d AND pattern flight. Showing both very smooth lines, but also slowing down well for 3d flight. The Slick 540 does most of your typical maneuvers VERY well: clean knife edges, EXCEPTIONALLY smooth rolling harries, harriers well, and does SNAP maneuvers SO cleanly due to its weight distribution.

With the bold contrasting scheme of this 50cc Slick 540, you will have great visibility even from a distance. Comes complete with carbon fiber gear, spinner and accessories! Hurry and get your 50cc Slick before we run out!









Videos on this plane:

VIDEO 1: Slick 540 with SFG Demo


VIDEO 2: FEATURING JAKE FAHN


VIDEO 3: FEATURING JARED REEVES


Buy Replacement Parts
Product Manual




Specifications:

• Wing span: 87"
• Wing area: 1440 sq. in.
• All up flying weight: 15-17 lbs. depending on build style
• Length: 83"
• Cowl:
  • Inside Width: 9.25" (234.95mm)
  • Inside Height: 9.25" (234.95mm)
• Engine: Recommended: DLE 55, DLE 55RA
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: 3.75"
• Recommended CG: 6.25" to 6.5" from LE and Root of the wing
• Recommended Prop Size:
  • 23x8 or 24x8
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon fiber landing gear and accessories
• Painted matching spinner (Optional)
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable.

ManiaX Power LiPo 3S 450mAh 11.1V 30C w/ JST 

Lemon RX DSMP 7-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

1. Plug bind plug to the receiver.
2. Provide power to the unit. LED flashes quickly.
3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
4. Remove bind plug.

Setting Failsafe

1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
2. Ensure that transmitter and receiver are turned on.
3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
4. Set transmitter controls to the desired failsafe positions.
5. Press the side pushbutton to memorize failsafe settings.
6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
7. Remove bind plug.
8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.