Spektrum DX6i Radio System with AR610 Receiver
DX6i 6-Channel DSMX® Radio System with AR610 ReceiverClick to Download DX 9 Instruction Manual THE PROGRAMMING YOU NEED. NOTHING YOU DON’T.The 6-channel DX6i includes software for airplanes and helicopters as well as benefits like ModelMatch™ technology and 10-model memory. Programming the DX6i is about as intuitive as it gets. The combination of its Simple Scroll™ interface, easy-to-read LCD screen and simplified menu navigation will immediately put first-time programmers at ease. Many programming functions like throttle curves and expo are graphically depicted to give you a clearer picture of the changes you're AIRPLANE FUNCTIONS
INCLUDES AR610 RECEIVERThe 6-channel AR610 combines the speed and precision of DSMX control with the signal security of an active amplified antenna. This antenna enables the receiver to “see around” reflective materials on a model and avoid polarization blind spots. Because it’s amplified, it can pick out its transmitter’s signal with remarkable clarity in noisy 2.4GHz environments. The AR610 also includes a data port for use with Spektrum telemetry modules and the Flight Log signal monitor. KEY FEATURES
PRODUCT SPECIFICATIONS
|
DX6i Radio System with AR610 Receiver
Bob Smith Industries 301 Extender Tips for CA Glue Bottles (6 Pack)
Bob Smith Industries 301 Extender Tips for CA Glue Bottles (6 Pack) UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.
Works Best On:
Avaliable in 1 oz Size.
|
BSI-301
$2.99
NEW
Fourtitude Dual Tank Mounting Trays 16oz
This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks. |
FORA1216
$14.99
Dynam 13x7 3-Blade Prop (F-4U, F6F, FW-190, BF-109)
Dynam 13x7 3-Blade Prop (F-4U, F6F, FW-190, BF-109)
|
DY-EP-3Blade
$7.99