SCORPION A-5524-205kv Motor for 73"-79" Airplane (12S 35-40cc)
The Scorpion A - Series line of motors was designed to be the most optimal and premier choice of motor for your freestyle or UAV airplane. We have achieved incredible performance through incredible efficiency. By optimizing the magnets in the rotor, and using the best quality 0.2mm thickness silicon steel stator sheets, and 2 x single strand 1.2mm enamel coated copper wire windings rated above 200C+, the performance and efficiency results are unlike anything we have seen before! Combined with a robust design which has been tested extensively by our world class team pilots for longevity and reliability, we feel this motor checks and exceeds all measurable categories! The A-5524-205kv was designed specifically for 73-79" Acrobatic Airplanes, or other Sport / UAV airplanes requiring up to 4600w of power. This motor is equivalent to a 35-40cc gas engine. We call it 35-40cc because with a 20" prop it is very equivalent to a 35cc gas engine and pulls less amps and therefore could run smaller batteries for lighter overall model weight. Or with a 23" prop it pulls as hard as a 40cc gas engine, with more amps thus requiring a larger battery. Recommended Prop Selection : 20x10E/21x8E = Efficiency 21x10E = Optimal / 35cc performance 22x10E/23x8E = High Alt 40cc Performance Recommended ESC -: Tribunus II+ 12-80A ESC SBEC Acrobatic Weight Range -: 5.25-9.1kg (11-20lbs) Sport / UAV (single engine) Weight Range : - 8.07-32.3kg (17-70lbs) A-5524 Official Promo Video
Full Dimension
Specifications
Performance Charts
Use Case Applications
Included in the Box1 x Scorpion A-5524 BLDC Motor | ||||||||||||||||||||||||||||||||||||||||||
NEW
Fourtitude Dual Tank Mounting Trays 12oz
| This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks. |
FORA1212
$14.99
Spot On Aluminum Round Servo Arm for 25T Futaba & New Hitec
| Spot On Aluminum Round Servo Arm for 25T Futaba & New Hitec High Quality 1" Aluminum servo arm from Spot-On RC Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose. They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm. Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance. Spot on offers their servo arms in many sizes, threads and gear output compatibility. Spot On arms are offered in: Available colors are Black or Silver Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center). However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios. Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design. No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
|
SPO-TRA-019
$9.99
SCORPION COMMANDER 15V 110A ESC SBEC (V3)
| SCORPION COMMANDER 15V 110A ESC SBEC (V3) |
ESC-42-110-SBEC-V3
$119.99
