SCORPION A-5524-205kv Motor for 73"-79" Airplane (12S 35-40cc)
Discontinued and replaced with the A2-6518-210KV arriving soon! The A2-6518 PNP combo are available now!
The Scorpion A - Series line of motors was designed to be the most optimal and premier choice of motor for your freestyle or UAV airplane. We have achieved incredible performance through incredible efficiency. By optimizing the magnets in the rotor, and using the best quality 0.2mm thickness silicon steel stator sheets, and 2 x single strand 1.2mm enamel coated copper wire windings rated above 200C+, the performance and efficiency results are unlike anything we have seen before! Combined with a robust design which has been tested extensively by our world class team pilots for longevity and reliability, we feel this motor checks and exceeds all measurable categories! The A-5524-205kv was designed specifically for 73-79" Acrobatic Airplanes, or other Sport / UAV airplanes requiring up to 4600w of power. This motor is equivalent to a 35-40cc gas engine. We call it 35-40cc because with a 20" prop it is very equivalent to a 35cc gas engine and pulls less amps and therefore could run smaller batteries for lighter overall model weight. Or with a 23" prop it pulls as hard as a 40cc gas engine, with more amps thus requiring a larger battery. Recommended Prop Selection : 20x10E/21x8E = Efficiency 21x10E = Optimal / 35cc performance 22x10E/23x8E = High Alt 40cc Performance Recommended ESC -: Tribunus II+ 12-80A ESC SBEC Acrobatic Weight Range -: 5.25-9.1kg (11-20lbs) Sport / UAV (single engine) Weight Range : - 8.07-32.3kg (17-70lbs) A-5524 Official Promo Video
Full Dimension
Specifications
Performance Charts
Use Case Applications
Included in the Box1 x Scorpion A-5524 BLDC Motor | ||||||||||||||||||||||||||||||||||||||||||
MPI Aluminum Servo Arms
| Description: MPI servo arms are made with heavy duty anodized aluminum offset servo arms designed for Hitec, Futaba, XQ Power, Power HD Servos. These MPI servo arms are drilled and tapped for 4-40 with a starter hole for another hole closer in if necessary. The clamping arm on these MPI arms ensures a safe and secure installation, minimizing any risk of slop or the arms coming loose. We recommend the following sizes of MPI arms for the planes below: 30cc planes typically use 1.25" for ailerons and elevators, and 3" for rudder. 1.25", 1.5", 3", 4" Sizes Available for HiTEC, XQ Power, PowerHD, Futaba Servos MPI Arms feature: Bracing for Extra Strength Lightweight and Strong Extra Security Screw to Keep Arms on Pre Dented to Allow for Optional Holes Futuba style arms fit: Power HD, XQ-Power, and Futaba Hitec fit: Hitec **Now introducing new size! 2-inch lengths for HiTec and Futaba! MPI Servo Arm Pricing:
|
KA -
$11.00
