Precision Crimping Tool for JR/Futaba Servo Leads & Terminals
| Precision Crimping Tool for JR/Futaba Servo Leads & Terminals This low cost crimping tool will get you started making your own high quality JR and Futaba servo extensions in no time. The crimping tool has three sets of teeth to allow crimping of 18-28AWG wire. With the cost of pre-made cables, this economical tool will pay for itself after a few self-made connectors. See our Futaba & JR Style "Locking" Servo Connectors (4 Pair) and Precision Wire Strippers (Auto Self-Adjusting) Also see our ProLine Heavy Duty Servo Cables (20Awg for HV high power demands)
|
ProLine Heavy Duty Servo Cables/Extensions (20AWG for HV)
ProLine Heavy Duty Servo Cables (20Awg for HV)
Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators. |
BRC-Proline
$6.99
Futaba & JR Style "Locking" Servo Connectors (4 Pair)
Futaba & JR Style "Locking" Servo Connectors (4 Pair)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
|
EX-Servo Connectors
$4.99
Precision Wire Strippers (Auto Self-Adjusting)
Precision Wire Strippers (Auto Self-Adjusting)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
|
EX-Wire Stripper
$17.99
200 Meters Bulk JR High Grade 20 AWG Servo Extension Wire (Twisted Orange, Red, Brown)
| 200 Meters Bulk JR High Grade 20 AWG Servo Extension Wire (Twisted Orange, Red, Brown) High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
|
EX-Bulk Ext wire
$250.00
XQ-4320 - full aluminum housing
|
Specifications:
Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!  |
X-4320
$99.00
Zap Zip Kicker 2oz Pump Spray
|
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PT-715
$6.99
