Browse ALL planes

Description:

*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

The Hurricane is an exciting model to fly. You will not be disappointed because the Hurricane is highly responsive in the air and since its made with EPO foam it is very durable and will last a long time. The entire plane was designed to deliver excellent flight and stability and it does just that! Enjoy the scale appearance with retractable landing gears and navigation lights on the main wings!!! Because it is a plug-and-play aircraft all the servos, (retracts, ESC, (speed controller), brushless motors, and control surfaces are factory installed. All you will need to supply is the 5 channel radio, receiver, 4S 2600 Lipo battery and of course, charger.

Video:

Key Features:

• EPO foam construction for great durability
• Factory installed retracts with spring loaded retract door
• BM3720 650kv already installed

Specifications:

Description:

*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

The Dynam SR-22 is an impressive single engine aircraft that has a very aerodynamic design. At 1:12 scale of the SR-22, the Dynam SR-22 is constructed by crash resistant EPO foam. No need to wonder about power- this plane is equipped with a 1000 kv brushless motor and a 30A ESC. Add a 3S 2200mAh Lipo battery and you are ready to go! The high aspect-ratio wings makes this airplane very stable with good glide capability. All servos, receiver, Brushless Motor and ESC are pre installed from the factory.

Key Features:

Specifications:

HLK-31 Land and Sea 630mm Jet RTF

Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Electric Ducted-Fan. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.

Key Features:

• Powerful 70mm EDF fan unit and motor
• 60A Brushless ESC with Switch-Mode BEC
• retractable landing gear
• Easy to build.
• SUPER FAST

Specifications:

Description:

RedwingRC Plug-and-Play aircraft!

The Dynam RC C188 can handle low speeds and altitude like a champ! The design of the C-188 has been perfected to give you the most enjoyable flight experience and control. Plus there is factory installed flaps!!! This is a great plane to learn on and a great chance to get used to a low-wing aircraft.

All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying, extend the flaps on landing for a perfect touchdown in any surface due to the fixed landing gear.

Build time is around 45- 60 min from box to air. Expect flight time to be from 8-15 minutes, just depends on how fast you fly.

Key Features:

• Factory Installed Flaps Servos and Flap Hinges for slower / shorter landings
• Powerful Detrum BM3170-500kv brushless motor
• 40A Brushless ESC with Switch-Mode BEC
• Durable and lightweight EPO construction with many surface details
• Excellent Flight Performance
• Detailed Body Structure
• Deans / T-Plug installed

Specifications:

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 

Specifications:

• Wing span: 92" / 2337
• Wing area: 78.58sq.dm
• All up flying weight:
• Length: 57.6" / 1462mm
• Cowl:
  • Inside Width:
  • Inside Height:
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG:
• Recommended Prop Size:
  •  
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder:|
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Fiberglass stab mounts
• Painted matching spinner (optional)
• Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 

Specifications:

• Wing span: 92" / 2337
• Wing area: 78.58sq.dm
• All up flying weight:
• Length: 57.6" / 1462mm
• Cowl:
  • Inside Width:
  • Inside Height:
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG:
• Recommended Prop Size:
  •  
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder:|
  • Ailerons: |
  • Elevator: |
     

Features:

• Adjustable push rods
• Aluminum Spinner (optional)
• Fast fly and easy build features, such as : pre-drilled hinges

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

Description:

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Includes a black plastic spinner
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

30cc Extra Red

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)