3D Aerobatic Electric

Contact UsCustomer Reviews

3D Aerobatic Electric


Products

30cc EXTRA 330 - Red/White/Blue

30cc Extra Red

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 


Build & Ship Plane

30-EXTRA-R2

$389.99

Out of stock

30cc EDGE 540 Yellow

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

 

Check out this awesome plane in action!


 

Specifications:

  • Wing span:
    • With tips:78.5
    • Without tips: 75"
  • Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
  • All up flying weight: 10.5 to 12 lbs.
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG: 5" to 5.75" from the front half of wing tube
  • Recommended Prop Size: 18x8 to 20x8
  • Recommended Throws: adjust to liking as you fly LOW MED HIGH

    AIL 1.75”/30% 2.75”/40% 4”/60%

    ELE 2.5”/30% 3.25”/ 40% 4”/55%

    RUD 2.5”/20% 3”/ 30% 4.25”/40%





Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Canister Tunnel built in
  • Painted matching spinner (available separately)
  • Includes a black plastic spinner
  • Optional integrated air deflector for venting hot cowl air
  • Fast Fly Feature: Pre-installed hinges (except rudder)
  • Carbon Fiber Retention Pins in stabs
  • Fiberglass tabs on stabs (stronger than wood)
  • Carbon Fiber Wing Tube
  • Metal Servo arm set
  • Removable Side Force Generators / Racing Wing tips

 


 

 

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

 

30-EDGE-Y

$428.99

Out of stock

58" Extra 330 (70e)

30cc Extra Red

 

Videos:</p>
<p>
<br />
<iframe allowfullscreen="" frameborder="0" height="360" src="https://www.youtube.com/embed/GAgax5rE1kw" width="630"></iframe></p>
<p>
<iframe allowfullscreen="" frameborder="0" height="360" src="https://www.youtube.com/embed/42e5nPGnITU?rel=0" width="640"></iframe><br />
<br />
<!-- Specs:         Specs:         Specs:         Specs:         Specs:           --><font color="#999999" face="Arial, Helvetica, sans-serif" size="4"><strong>Specifications:</strong></font></p>
<ul>
 
 

 

 

Build & Ship Plane

 

70E-Extra-B

$299.00

EPP YAK55 3D Airplane 31.5" (800MM) Wingspan

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

DW-E1704

$64.99

EPP SAKURA 3D Airplane 17.8" (451MM) Wingspan

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

DW-E0101

$44.99

Out of stock

RC Gadgetz Edge 540 PNP

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

RCG-EdgeRWB

$429.00

Flight Model Outlaw 3D Double Decker 47" (1.2M) PNP

Flight Model Outlaw Double Decker 47" (1.2M) PNP

FM-M095-Outlaw

$429.99

STICK-14 V2 55" (1400mm) Wingspan Pre-Built ARF Balsa Wood Electric 3D Aerobatic Trainer PNP

STICK-14 V2 55" 1400mm Wingspan Pre-Built ARF Balsa Wood Electric 3D Aerobatic Trainer PNP

DW-TCG1404

$329.99

60" (1524mm) Laser 260 (70e) AeroplusRC

60" Laser 260 (70e) AeroplusRC

 

Videos:</p>
<p>
<br />
<iframe allowfullscreen="" frameborder="0" height="360" src="https://www.youtube.com/embed/GAgax5rE1kw" width="630"></iframe></p>
<p>
<iframe allowfullscreen="" frameborder="0" height="360" src="https://www.youtube.com/embed/42e5nPGnITU?rel=0" width="640"></iframe><br />
<br />
<!-- Specs:         Specs:         Specs:         Specs:         Specs:           --><font color="#999999" face="Arial, Helvetica, sans-serif" size="4"><strong>Specifications:</strong></font></p>
<ul>
 
 

 

 

Build & Ship Plane

 

70E-Laser Red

$299.00

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft 

DW-S2501

$177.99

Upgraded EPP SAKURA 3D Airplane 16.5" (420MM) Wingspan PNP

Upgraded EPP SAKURA 3D Airplane 16.5" (420MM) Wingspan  

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

DW-E2105

$79.99

Out of stock

New PP Material SAKURA 3D F3P Airplane 16.5" (420MM) Wingspan PNP

New PP SAKURA 3D Airplane 16.5" (420MM) Wingspan  

 

 

DW-E2115

$84.99