Charge Cables/Adapters

Description:

20 Function Charge Adapter to Male 4mm Bullets - 300mm Wire 

Known around our office as the "giant squid", this charge adapter is an absolute must for your store's service department and for experienced, diversified consumers. Includes the following plugs to address most any charging requirement: Futaba TX, JR TX, Universal RX, EC5, EC3, EC2, XT90, XT60, T-Plug, Tamiya-style Molex, Mini Tamiya-style Molex, EFL/BLH micro, Hubsan-style micro, Glow Plug (for charging Ni-Starters), HC (Traxxas-style), XH-style micro, Molex mini, JST, XL JST (Mini-T style connector), and finally a blank set of wires to add any type of connector we may have forgotten. This is absolutely the finest and most versatile charging squid you or your customers may ever need. 

24" Charge / Balance Lead Extension Kit

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

Description:
1 piece: 2S JST Male to Female Extension

This is a 12" extension for JST connections. This will allow you to mount your LiFe battery to an inaccessible area and route the wire to where you can easily balance charge it as needed. (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger

Fully compatible with Redwing RC LiFe batteries

1 Male to Female JST 12" extension
 

2S, 3S, 4S, 5S and 6S JST Male to Female Extensions 12" 
1 piece: 2S JST Male to Female Extension

This is a 12" extension for JST connections. This will allow you to mount your LiFe battery to an inaccessible area and route the wire to where you can easily balance charge it as needed. (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger

Fully compatible with Redwing RC LiFe batteries

1 Male to Female JST 12" extension

4-Function Charge Adapter to Male 4mm Bullets (XT60, XT90, EC3, EC5)

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

5-Function Charge Adapter to Male 4mm Bullets (XT60, XT90, EC3, EC5, Deans)

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

Description:

5-Function Mini/Micro Charge Adapter to Male 4mm Bullets

Description:

8-Function Charge Adapter to Male 4mm Bullets-300mm Wire 

Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. 

Description:

Short 3 wire to keep tangled wires to a minimum when charging batteries outside of your plane. You can still charge the batteries inside your plane as long as you can get the charger relatively close to the wire or port. Ideal for a multi charger since you won’t have 4 or more super long wires getting tangled and twisted as you try to charge your batteries.

Description:

Short 3 wire to keep tangled wires to a minimum when charging batteries outside of your plane. You can still charge the batteries inside your plane as long as you can get the charger relatively close to the wire or port. Ideal for a multi charger since you won’t have 4 or more super long wires getting tangled and twisted as you try to charge your batteries.

Description:

Short 3 wire to keep tangled wires to a minimum when charging batteries outside of your plane. You can still charge the batteries inside your plane as long as you can get the charger relatively close to the wire or port. Ideal for a multi charger since you won’t have 4 or more super long wires getting tangled and twisted as you try to charge your batteries.

Description:

Short 3 wire to keep tangled wires to a minimum when charging batteries outside of your plane. You can still charge the batteries inside your plane as long as you can get the charger relatively close to the wire or port. Ideal for a multi charger since you won’t have 4 or more super long wires getting tangled and twisted as you try to charge your batteries.