DLE Replacement Parts

100-130cc Twin Canister Muffler (DLE111/120/130, EME120, DLA112/116)

23CC-30CC Accelerator/Resonance Tube, 26CC Rear Exit Canister Muffler

26-40cc Rear Exit Canister Muffler (DLE30, EME35, DLA32)

50cc Pitts Muffler (DLE55 DLE55RA DA50)
Easy to install Pitts muffler for DLE 20cc, DLE 30cc and DLE 55. This allows you to do less cutting to your cowl and have a more scale plane on your 20cc, 30cc or 50cc sized plane. Fits DLE engine as well as many others with similar exhaust ports

The 20cc Pitts Muffler will mount on the DLE 20 and many more engines with the same exhaust port bolt spacing.

The 30cc Pitts Muffler will mount on the DLE 30, DLE 35RA, JC 28, MLD 28, as well as many others with a 34mm spacing on the exhuast port.

The 50cc Pitts muffler will mount on the DLE 55, DLE 55RA, DA50, DLA 50, and many more engines with the same exhaust port bolt spacing.


Specs: 30cc / 50cc

• weight: 4.5oz / 6.5oz

Original DLE ignition for DLE engines. Choose your engine size below.

 

DLE Muffler Extensions

Description:

Choose from 5 sizes!

These extensions fit over the exhaust exits on your DLE muffler. Below are some size dimensions and the muffler that each will fit. It is still a good idea to measure the exits on your muffler.

FORMAT: LxW (width is inside diameter)

A: 63x15 mm : DLE 20RA

B: 64x17 mm : DLE 35RA/40

C: 78x20 mm : DLE 55RA

D: 96x25 mm : DLE 55, DLE 111, DLE 120

E: 121x31 mm : DLE 61, DLE 85

*Sold individually- if you have a twin engine, you will need two extensions

*Each Hose extension comes with a metal clamp to tightly secure it to the muffler.

Description:
This is a genuine DLE Porpeller Drill Guide made of high quality heavy steel that can be used to perfectly drill your props and spinners for the DLE 30cc, DLE 35RA, DLE40T Gasoline Aircraft Engines.

MountSimply mount the drill jig on the back side of the prop. Orientate the blade tips 9 and 3 o'clock - or horizontal to the ground. Tighten the bolt so the fixture can not move. Drill your prop from the back side or mounting side.

Description:
This is a genuine DLE Porpeller Drill Guide made of high quality heavy steel that can be used to perfectly drill your props and spinners for the DLE 30cc, DLE 35RA, DLE40T Gasoline Aircraft Engines.

MountSimply mount the drill jig on the back side of the prop. Orientate the blade tips 9 and 3 o'clock - or horizontal to the ground. Tighten the bolt so the fixture can not move. Drill your prop from the back side or mounting side.

Flexible Header (26cc-35cc DLE30 EME 35)

Flexible Header (50cc-60cc DLE55 EME 55/60) 

Flexible Header With Smoke Nozzle For DA50/DLE55/DLA56/EME55/50-55CC 

RCEXL CM6 (10mm) Single Cylinder Ignition (NEW6.0V - 14.4V) For DLE 20/30/55/61/85