Browse ALL planes

Contact UsCustomer Reviews

Browse ALL planes


Products

NEW

1.8M "BigBlue" Gas or Electric Sport Trainer (71"/1800mm) Balsa Kit (Tricycle or Tail-Dragger gear)

Vogee-16 (63"/1600mm) Balsa ARF-PNP (Trainer)

Pre-order sale $100 off! Estimated Arrival Late Feb 2024

  • This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive one from the first shipment.

Credit Card or other payment will be charged at the time of order.

DW-T18-Bigblue-1.8M Trainer

$199.00

NEW

Dynam Sonic 85 3S Micro Parkfly RC Glider Trainer 850mm Wingspan

Dynam Sonic 85 3S Micro Parkfly RC Glider Trainer 850mm Wingspan

RedwingRC Plug-and-Play aircraft!   

Check out this really interesting design in the Warbird series- The Messerschmitt BF-110. This is such a great plane and because its constructed with damage resistant EPO foam it is very durable and will last along time. The Messerschmitt BF-110: 2X the motors, 2X the fun!!!

This model come with Flaps, Retracts, 2 ESCs, 2 Motors, and all the required servos. (Flaps will require a servo reverser either external or on the Transmitter). The build on this one is very easy and straight forward. The only surprise is the minimal work needed to get this plane in the air.

The twin motors will provide more than enough power and a majority of the flight can be flown at 50% throttle.

** Please note: It is important to calibrate the throttle and check the settings for both motors since this is a twin.

Video:

 

Key Features:

  • 6 Servos - Flaps factory installed (requires a servo reverser to use the flap servos)
  • Factory installed retracts with spring loaded retract door
  • Dual powerful dectrum motors installed
  • Spring loaded retract doors

 

Specifications:

Wingspan: 59in (1500mm)
Overall Length: 44.17in (1122mm)
Flying Weight: 1900g
Motor Size: 2 x BM 3512-850kv
Propeller: 2 x (10 x 6 x 3)
Radio / Transmitter: NOT INCLUDED (requires 6ch radio for flaps and retracts- not included)
Receiver: +5 Channel (NOT INCLUDED)
Servos: 6 servos installed ( 6 x 9g)
Speed Control : 2 x Dectrum 40Amp Installed
Battery: 14.8V 2200 mah 25C (not included)
Charger: NOT INCLUDED
Flight Times:

Average 5-7 Minutes

Assembly Time:

45min - 60 mins

 

 

 


 

DY8983-Sonic 85

$139.99

NEW

20cc Tiger Sport Trainer ARF (75.6"/1920mm) Balsa

Pre-order sale $50 off! Estimated Arrival Mid-late Nov 2022

  • This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive a unit from the first shipment.

Credit Card or other payment will be charged at the time of order.

Shipping Flat Rate $60 in the lower 48 states. $30 Container Freight charge has been added to this item due to excessive Container prices!

Looking for a fun, economical gas powered airplane that won't break the bank? Check out the Falcon Trainer 20CC. This all wood high wing trainer is perfect for lazy days at the flying field putting around the skies, sipping petrol, shooting touch and goes, or teaching someone to fly!

The Falcon Trainer comes almost ready to fly, meaning you just need to complete the final assembly and install your choice of equipment. The pre-fabricated wood components come covered in a multi-color plastic film that is durable and will look great for years to come. Rugged aluminum main landing gear absorbs landing loads and allows the Falcon Trainer to handle rough runways with ease. For easy transport the wing simply bolts in place. As this is a fun, slow flying trainer, you will just need some inexpensive standard servos for each control surface.

Running off a very common 20CC gas engine, the Falcon is low maintenance and low cost to operate. No need to run expensive nitro fuel. The large wing area, and light weight construction gives the Falcon a very light wing loading, meaning slow cruising and landing speeds. As a trainer it is very stable and forgiving. Due to its large size, it is perfect to use for other duties like aero-towing gliders, dropping parachute men, endurance UAV or aerial photography.

Features:
• Almost Ready to Fly - Complete final assembly and install your choice of electronics and power system
• Built up balsa and plywood airframe
• Vibrant multi-color plastic film covering
• Rugged aluminum main landing gear
• Complete hardware pack including wheels and fuel tank
• Bolt-on wing
• Light wing loading for slow cruising and landings

Specs:
Wingspan: 1860mm
Length: 1550mm
Flying Weight: 3900g
Wing Area: 62dm2

Requires:
4+ channel Transmitter and Receiver
20CC Gas Engine
5 * Standard Size Servos
Misc Building Adhesives

20-Tiger-Sport Trainer

$275.00

NEW

40in Tiger Sport Trainer Electric ARF (40.1"/1020mm) Balsa

Pre-order sale $50 off! Estimated Arrival Mid-late Nov 2022

  • This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive a unit from the first shipment.

Credit Card or other payment will be charged at the time of order.

Shipping Flat Rate $60 in the lower 48 states. $30 Container Freight charge has been added to this item due to excessive Container prices!

Looking for a fun, economical gas powered airplane that won't break the bank? Check out the Falcon Trainer 20CC. This all wood high wing trainer is perfect for lazy days at the flying field putting around the skies, sipping petrol, shooting touch and goes, or teaching someone to fly!

The Falcon Trainer comes almost ready to fly, meaning you just need to complete the final assembly and install your choice of equipment. The pre-fabricated wood components come covered in a multi-color plastic film that is durable and will look great for years to come. Rugged aluminum main landing gear absorbs landing loads and allows the Falcon Trainer to handle rough runways with ease. For easy transport the wing simply bolts in place. As this is a fun, slow flying trainer, you will just need some inexpensive standard servos for each control surface.

Running off a very common 20CC gas engine, the Falcon is low maintenance and low cost to operate. No need to run expensive nitro fuel. The large wing area, and light weight construction gives the Falcon a very light wing loading, meaning slow cruising and landing speeds. As a trainer it is very stable and forgiving. Due to its large size, it is perfect to use for other duties like aero-towing gliders, dropping parachute men, endurance UAV or aerial photography.

Features:
• Almost Ready to Fly - Complete final assembly and install your choice of electronics and power system
• Built up balsa and plywood airframe
• Vibrant multi-color plastic film covering
• Rugged aluminum main landing gear
• Complete hardware pack including wheels and fuel tank
• Bolt-on wing
• Light wing loading for slow cruising and landings

Specs:
Wingspan: 1860mm
Length: 1550mm
Flying Weight: 3900g
Wing Area: 62dm2

Requires:
4+ channel Transmitter and Receiver
20CC Gas Engine
5 * Standard Size Servos
Misc Building Adhesives

40in-Tiger-Sport Trainer

$189.00