Browse ALL Parts

Description:
1 piece: DEANS to 2 JR adapter

This adapter is fully compatible with Deans connectors. This enables you to, for example, plug into the Deans plug on our batteries, and have it turn into two JR connectors for your RX or ignition.



1 MALE Deans plug to 2 JR MALE Plugs adapter

 

Description:
1 piece: 2S JST Male to Female Extension

This is a 12" extension for JST connections. This will allow you to mount your LiFe battery to an inaccessible area and route the wire to where you can easily balance charge it as needed. (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger

Fully compatible with Redwing RC LiFe batteries

1 Male to Female JST 12" extension
 

Description:
Quck Connect Fuel Cap. Makes connecting tubing from your fuel receptacle easy.
Includes all the fittings, pick up and tubing to complete. Fits onto Nitro fuel bottles OR onto small metal gas cans
Does not fit onto Blitz style gas cans

Description:
This is a handy break-apart fuel filter with screen for easy cleaning.

A very inexpensive way to ensure you don't suck dirt particles into your engine

This package of 10 Pin Hinges are high quality steel pin hinges desinged to join your surfaces with strong free momvement. Built in the "Robart" style of hinge, they are strong and light and offer a high quality connection to your moving surfaces for 20cc or bigger planes

These hinges will install by drilling a 3/16" hole and inserting the hinge with a bit of glue.

---

Check out these Videos:

These Lightweight Tires/wheels for RC planes are treaded durable rubber wheels. they offer a strong but light option for your 3d plane and also give you significant shock absorption on landings.

These RC plane wheels are available in 3" and 3.5" sizes. 3" is good for 30cc and similar. 3.5" are good for 50cc and similar sized planes

Weight: Approximately 3oz PER pair

SOLD IN PAIRS

We're not screwing around! Finally there's a place where you can get the little screws you need for all kinds of projects. Whether you need a discreet screw or you just can't seem to find a servo screw - Redwing's got you covered!

Try the HD screws for replacment servo screws - just like the ones that come with any servo, these screws are only threaded up to a certain point.

The 02 screws are good for any servo OR discreet wood to wood projects since these are threaded all the way up to the head.

The 00 and 01 screws are good for any discreet wood to wood projects.

Packs of 10:

• HD - $4.99
• 00 - $2.99
• 01 - $2.99
• 02 - $2.99

Description:
The XION RC Wing Lock is a new innovative item that is LONG over due!

Do you HATE breaking your back bending over your plane trying to fit your hands in a tight space while screwing in your nylon bolt for 3 minutes? If so the XION Wing Lock is the answer!

It installs EASILY and allows for INSTANT attachment of your wings. Once installed, simply slide your wing onto the wing tube and into the fuselage, then click and lock! Locks your wing in, in SECONDS. See the video for a visual sample of how easy it is and how well it works.

Available for planes that have 6mm T nuts installed in the wings OR 1/4-20. More sizes to come.


Specifications:

• Bolt threads: 6mm or 1/4-20 available
• STRONG Aluminum construction
• Weight: .5oz for one full set
• Length Dimension
  • Bolt: approximately 38 mm (1.5 inches)
  • Cam Lever: approximately 38 mm (1.5 inches)

Buy multiple sets and save!(Comes in pairs)

 

Fortitude Fuel Can Fittings(FORA 1006):
This set will convert your fuel supply can to accept our FORA1007 Aircraft Fueling Fittings Set. Can be used in line with any existing fueling fitting you might be using on your fuel supply can. Seals out the atmosphere 100% so you don't have to worry about the fuel going bad as quickly. Barbs are for 1/8" ID fuel tubing. Can be used with Glow, Petrol, and Smoke.

Aircraft Fill/ Vent Fittings (FORA 1007):
These nylon fittings weigh practically nothing and only require a 1/4" hole drilled into your aircraft to mount them. The caps and filler have a double sealing surface assuring they won't leak. You can mix and match the parts for multiple applications.

A typical example would be to use one fitting for fill and the second for the vent line. This gives you a nice clean look on the cowling and you don't have to worry about the vent coming loose and bouncing around in your fuselage. If you fly at a field that requires an over flow catch tank you can use one of the extra filler fittings to quickly attach the catch tank on the vent fitting while filling the tank. A half turn twist and the over flow catch tank is detached and your ready to fly. The threads are 1/4x28UNF and are 5/16" in length. Barbs are for 1/8" ID fuel tubing. Can be used with Glow, Petrol, and Smoke.


TEMPORARILY OUT OF STOCK. Add to cart to PRE ORDER and we will ship ASAP

Description:

MPI Charge switch with LED indicator for HiTec and JR leads and on-board battery checker! The three LEDs - green, yellow, & red - monitor the status of the flight pack. It is designed to test the battery under the actual load of the on-board equipment.

The switch is factory preset to 4.8V applications - but for 6V use, simply cut the jumper loop on the back of the switch and seal the wires with silicone glue or tape. The jumper wires can be reconnected for 4.8V operation.

Features:

• Heavy duty switch and wires
• Sturdy one-piece design
• Built-in Redundancy
• 3-LED on-board battery checker
• Compatible with 4.8v and 6v Rx packs
• Easy installation and operation
• Silicone shock mount included
• DSC compatible

LED display light with male JR connector for RedwingRC Power Boards.