New Arrivals - RedwingRC.com

Contact UsCustomer Reviews

New Arrivals

NEW

GT-Cygnus F3L and F5L RES 1970mm ARF (F3/F5-RES Competition Pure Glider or Electric Motor)

GT-Cygnus F5L RES Catapult Launch Glider 1970mm ARF (Electric Motor)

The GT2000v2 Powered Glider is a high-performance competition grade glider with light weight carbon fiber and wood construction ideal for precision competition or a gentle relaxing flight. With its elegant wings and carbon fiber fuselage it responds superbly to thermals.

The GT2000v2 version has integrated carbon fiber throughout the model to maximize strength and performance while improving the quality, reducing weight and increasing the performance of glider. Below is a list of improvements from version 1:

  • Thinner/lighter fiberglass battery compartment
  • Carbon fiber canopy and tail pipe
  • Wings constructed with carbon fiber main beam and carbon tube latch with three-stage plug-in structure design for easy transport
  • Thinner wings and optimized airfoil to improve gliding performance
  • Most accessories are made of carbon fiber with improved strength and lighter weight
  • Tail wing incorporates a torsion spring to improve return to center and lighter weight structure

Maximized strength is provided with the carbon fiber tail pipe and carbon fiber reinforced wings so the glider can withstand high speed precise flights setting new standards in the 2M wingspan class. The ailerons and flaps are a wide and long feature, making pin-point landings easy while also improving the launch characteristics and giving the pilot a broad performance spectrum for high speed, aerobatics and thermalling.

The planes docile flying characteristics and excellent performance in the air ensure that the GT2000v2 provides maximum flying pleasure, whether you are a weekend pilot or flying in a competition. You will enjoy floating through the air for long periods, as well as lively aerobatics- all with style and precision.

The model comes as a kit version only due to multiple different power system and competition requirements for pilots. Below are some suggestions:

  •  Recommend a motor with reverse shaft and outer diameter of 28mm, such as XM2838 P5B special motor, or higher performance motor
  • ·May use standard size 9g servos for the tail and wing; however due to the thin wing must use smaller wing servos such as KST08, GDW1906, or Blue Arrow D0474HT MG for the aileron and flap. The thickness of the servo should be less than 9mm and the torque greater than 2kg.

Specs:
Wing Span: 2000MM
Length: 1120MM
Wing Area: 30.3dm2
Flight Weight: 670g
Servos: 9g*6
Motor: XM2838 P5B 1800KV
Esc: 40A (as required based on motor)
Propeller: 8x6E (as required based on motor)
Battery: 3S 11.1V 1300mAh (as required based on motor)

CG: about 45mm from the front leading edge of the wing

GT-F3L-Cygnus

$450.00

NEW

GT-P3T Composite RES Catapult Launch Glider 1350mm ARF/PNP

GT-P3T Composite Catapult Launch Glider 1350mm ARF/PNP

The GT2000v2 Powered Glider is a high-performance competition grade glider with light weight carbon fiber and wood construction ideal for precision competition or a gentle relaxing flight. With its elegant wings and carbon fiber fuselage it responds superbly to thermals.

The GT2000v2 version has integrated carbon fiber throughout the model to maximize strength and performance while improving the quality, reducing weight and increasing the performance of glider. Below is a list of improvements from version 1:

  • Thinner/lighter fiberglass battery compartment
  • Carbon fiber canopy and tail pipe
  • Wings constructed with carbon fiber main beam and carbon tube latch with three-stage plug-in structure design for easy transport
  • Thinner wings and optimized airfoil to improve gliding performance
  • Most accessories are made of carbon fiber with improved strength and lighter weight
  • Tail wing incorporates a torsion spring to improve return to center and lighter weight structure

Maximized strength is provided with the carbon fiber tail pipe and carbon fiber reinforced wings so the glider can withstand high speed precise flights setting new standards in the 2M wingspan class. The ailerons and flaps are a wide and long feature, making pin-point landings easy while also improving the launch characteristics and giving the pilot a broad performance spectrum for high speed, aerobatics and thermalling.

The planes docile flying characteristics and excellent performance in the air ensure that the GT2000v2 provides maximum flying pleasure, whether you are a weekend pilot or flying in a competition. You will enjoy floating through the air for long periods, as well as lively aerobatics- all with style and precision.

The model comes as a kit version only due to multiple different power system and competition requirements for pilots. Below are some suggestions:

  •  Recommend a motor with reverse shaft and outer diameter of 28mm, such as XM2838 P5B special motor, or higher performance motor
  • ·May use standard size 9g servos for the tail and wing; however due to the thin wing must use smaller wing servos such as KST08, GDW1906, or Blue Arrow D0474HT MG for the aileron and flap. The thickness of the servo should be less than 9mm and the torque greater than 2kg.

Specs:
Wing Span: 2000MM
Length: 1120MM
Wing Area: 30.3dm2
Flight Weight: 670g
Servos: 9g*6
Motor: XM2838 P5B 1800KV
Esc: 40A (as required based on motor)
Propeller: 8x6E (as required based on motor)
Battery: 3S 11.1V 1300mAh (as required based on motor)

CG: about 45mm from the front leading edge of the wing

GT-P3T

$375.00

NEW

Tazz Model Rocket Kit, Advanced

Tazz Model Rocket Kit, Advanced

EST7282

$25.99

NEW

Black Brant II 1/13 Scale Model Rocket Kit

Black Brant II 1/13 Scale Model Rocket Kit

EST7243

$25.99

NEW

GT1500V3 Dragonfly F5J/P5B Competition Grade CF Powered Glider (1.5M) PNP

GT1500V3 Dragonfly F5J/P5B Competition Grade CF Powered Glider (1.5M) PNP

GT-1500V3-Dragonfly

$400.00

NEW

Flight Model 106" Extra 330SC ARF

Flight Model 106" Extra 330SC ARF 

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

FM-F152-Extra330SC-100cc

$1199.00

NEW

Flight Model 90" LaserX 55-60cc ARF

Flight Model 90.5" Slick 580 55-60cc ARF 

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

FM-F185-LaserX

$689.00

NEW

Flight Model 90.6" Slick 580 55-60cc ARF

Flight Model 90.5" Slick 580 55-60cc ARF 

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

FM-F181-Slick580

$689.00

NEW

Flight Model 86.6" YAK55 50cc ARF

Flight Model 86.6" YAK55 50cc ARF

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

FM-F0181T-YAK55

$689.00

NEW

Flight Model 76" VOTEC 322 35-40cc Orange/Blue ARF

Flight Model 76" VOTEC 322 35-40cc Orange/Blue ARF

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

FM-F173ORBL-Votec

$599.00

NEW

Flight Model 87.4" Giant Scale Taylorcraft-90 EP Balsa ARF

Flight Model 87.4" Giant Scale Taylorcraft-90 EP Balsa ARF

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

FM-M090T-Taylorcraft

$499.00

NEW

Flight Model 96" Giant Scale Super Decathlon 35-40cc Yellow ARF

Flight Model 96" Giant Scale Super Decathlon 35-40cc Yellow ARF

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

FM-F043-Decathlon-Y

$599.00