Cessna-188 Scale Crop Duster 4S STOL V2 1500mm (59") with Tundra Rubber Wheels- Orange

Contact UsCustomer Reviews

Cessna-188 Scale Crop Duster 4S STOL V2 1500mm (59") with Tundra Rubber Wheels- Orange

Our Price:

$209.99


PNP or SRTF ver
Quantity (3)

Availability 3 in stock
Weight 5.00 lbs
SKU DY8967-ORANGE

RedwingRC Plug-and-Play aircraft!

The Dynam RC C188 can handle low speeds and altitude like a champ! The design of the C-188 has been perfected to give you the most enjoyable flight experience and control. Plus there is factory installed flaps!!! This is a great plane to learn on and a great chance to get used to a low-wing aircraft.

All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying, extend the flaps on landing for a perfect touchdown in any surface due to the fixed landing gear.

Build time is around 45- 60 min from box to air. Expect flight time to be from 8-15 minutes, just depends on how fast you fly.

Dynam Cessna 188 Crop Duster V2 4S 1.5m w/ Flaps Upgraded Details:

  • Rear-Mounted Servos
    Shortens the pushrod length, reducing response lag and improving control precision.
  • Detachable Wings
    Simplifies transportation and storage, making it more convenient to carry.
    Enables easier maintenance and quicker wing replacement.
  • Carbon Fiber Reinforcement
    The wings are reinforced with carbon fiber, providing enhanced structural integrity and durability.
  • No-Glue Vertical and Horizontal Stabilizers (Screw-On Installation)
    Streamlines assembly and disassembly, enhancing convenience and durability.
  • Powerful BM3720-KV900 Motor
    Provides a thrust of up to 2.8kg, delivering exceptional power for vertical climbs and high-G maneuvers.
    Offers robust power reserves to handle more complex flying conditions and advanced aerobatics.
  • Upgraded ESC (Skylord-50A 5A BEC)
    Ensures efficient and stable current management, allowing the motor and servos to operate smoothly.
    Features a built-in 5A BEC, providing consistent power to the electronics and reducing the risk of failure.
  • Spacious Battery Compartment with Wooden Padding
    Reinforced with wooden layers to enhance durability and prevent deformation over extended use.
  • Ball-Link Pushrods
    Reduces play in the pushrod system, providing precise and reliable control of control surfaces.
    Offers enhanced durability, minimizing wear over time.
  • Reinforced Fixed Landing Gear
    The landing gear has been engineered to endure high-intensity takeoffs and landings, ensuring long-term durability and reliability.
  • 4" Smooth Surface Rubber Foam Wheel (3.6 mm Hole/axle)

This Dynam Cessna 188 Crop Duster Orange 1500mm 59" STOL RC Scale Plane is perfect for all intermediate pilots wanting to try their skills on their first low-wing monoplane, as it is also made from a durable, damage-resistant EPO foam which is light and easy to repair. Dynam Cessna 188 Crop Duster Orange is finished with a high-contrast orange, black, and white paint scheme. This remote-controlled aircraft is relaxing to fly and will put a smile on any pilot's face!

Now available in SRTF version which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle.

SRTF-6C Version: Includes a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-6C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter

SRTF-8C Version: Features a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-8C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-DT9 Version: Comes with a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Blitz-DT9 transmitter (programming & telemetry), SR86A-G 8-channel gyro receiver, battery, charger, and adapter.

Select PNP or SRTF ver in the drop down above

What is required (PNP):

  • 6-Channel or above transmitter
  • 6-Channel receiver
  • 4S 14.8V 2200mAh Li-Po 20C w/ XT60 and charger

Key Features:

  • Factory Installed Flaps Servos and Flap Hinges for slower / shorter landings
  • Powerful Detrum BM3720-650kv brushless motor
  • Tomcat Skylord 40A Brushless ESC with 3A-BEC
  • Durable and lightweight EPO construction with many surface details
  • Excellent Flight Performance
  • Detailed Body Structure
  • Scale pilot for added detail

Specifications:

Wingspan: 59in (1500mm)
Overall Length: 39.6in (1005mm)
Flying Weight: 1300g w/Battery
Motor Size: BM3720-650KV brushless outrunner motor (installed)
Radio / Transmitter 8 Channel Required - NOT INCLUDED PNP
Receiver 8+ Channel (not included pnp)
Servos: 6 x 9g (Installed)
Speed Control : TomCat Skylord-40A ESC 3A-BEC (installed)
Battery: 14.8V 2200 mah 25C XT60 (Not Included pnp)
Charger: Not included PNP
Flight Time: 8 to 15 Minutes

 

$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.


 

: *
: *
: *
 

Miracle RC - Electric Fuel Pump

Description:
This Miracle RC Fuel pump is a MUST have accessory. Saves you time and elbow grease when filling up your tank. The case is CNC process 6061, and it has a hardened pump barrel. It has a magnet on the outside, so you it can stick right onto metal containers!

The gears are fuel proof nylon, and fiberglass filled
The gear shaft is stainless steel
Japaneese oil seals
The end-seal O-ring is made of butadience-acrylonitrile rubber - so it can be used with nitro, gas, or even kerosene
volatage: 7.2 to 12V
Flow rate: 1000ml/min at 11.1V
Includes a filtered nozzle and clunk

DO NOT DRY RUN

MRC-K-011-FP

$89.00

FUTABA 16SZH 2.4GHz FASST Heli Spec Radio System w/ R7008SB Receiver

FUTABA 16SZH 2.4GHz FASST Heli Spec Radio System w/ R7008SB Receiver 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)





  •  
  •  
  •  
  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01004356-3

$819.99

HiTec D956WP High Torque, Waterproof, Steel Gear Digital Servo, 0.12sec/405oz @7.4v

D956WP High Torque, Waterproof, Steel Gear Digital Servo, 0.12sec/405oz @7.4v

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for pilots with the need for speed!

Features:

  • Power Efficient Brushless Motor Controller
    Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.
  • Custom NeuMotor
    Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.
  • Constant Torque Output:
    Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.
  • Hybrid MPD 1st Gear:
    Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.
  • Industry-Leading Titanium Gear Train
    Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.
  • 25-Tooth Standard Spline
    Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.
     

    Specifications:

    • Torque:
      • 236 oz/in at 6V (17.0 kg-cm)
      • 236 oz/in at 7.4V (17.0 kg-cm)
         
    • Speed:
      • .08 sec at 6V
      • .06 sec at 7.4V
         
    • Voltage: 6V - 7.4V
    • Weight: 2.40oz (68g)
    • Size: 40 x 20 x 68 mm (1.57 x 0.79 x 1.50in)

HRC36956S

$119.99