4Ch AF-Model F-16 Fighting Falcon 50mm 12 Blade EDF PNP

Contact UsCustomer Reviews

4Ch AF-Model F-16 Fighting Falcon 50mm 12 Blade EDF PNP

Market Price: $168.99
Our Price:

$128.99

You Save

24%

Battery Combo
Charger Combo
Radio and Receiver combo
Adhesive
Quantity (10)

Availability 10 in stock
Weight 5.00 lbs
SKU AF-043-F16
Manufacturer AF Model

This very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory and even sports a pair of Sidewinder missiles on the wing tips. A low parts count means that assembly of the F-16 Falcon is quick and easy. It comes mainly pre-built with the 50mm 12-bladed EDF, motor, ESC, and servos pre-installed. All you need to do is glue on the nose cone, plug in the two wings (these are held in place with strong magnets), assemble the tail parts, and install your chosen receiver and battery, that's it!

This EDF uses a 3S battery set-up which gives it the extra power to do those huge looping and vertical maneuvers that fast jets are renown for, it also looks fantastic when doing fast, low passes over the take-off strip. The flight characteristics of the F-16 do not stop with fast-flying only, the slow-speed handling is exceptional as well, with slow, high-alpha passes being a breeze to perform. The F-16 has outstanding flight characteristics in its own right, it flies like it is on rails. 

To summarize, the F-16 Fighting Falcon is quick and simple to build, it is tough, and flies very smooth and stable in all weather with loads of power and speed. This super cool F-16 is a must-have to add to your squadron of airplanes!

Features:

  • Authentic scale detail and color scheme
  • Plug-N-Fly
  • Outstanding flight characteristics at high and low speeds
  • Pre-installed high power 3S set-up with 50mm 12 blade EDF fan unit
  • Two-piece plug-in wing design with magnets and carbon joiner
  • Large battery compartment for easy access

Specs:

  • Wing Span: 588mm (23”)
  • Length: 800mm (31.5”)
  • Weight: Approx 500g (18.4ozs) w/3S 1300mAh LiPo battery
  • EDF: 50mm 12 blade w/brushless motor
  • ESC: 30A brushless w/BEC
  • Servo: 9g x 4

Required:

  • 4ch or more radio and receiver (see combo savings)
  • 3S 1000~1300mAh LiPo battery 30C or greater (see combo savings)
  • Adhesive (see combo savings)
  • Suitable LiPo charger (see combo savings)




: *
: *
: *
 

FUTABA T6KH 2.4GHz T-FHSS Heli Spec Radio System w/ R3001SB Receiver

FUTABA T6KH 2.4GHz T-FHSS Heli Spec Radio System w/ R3001SB Receiver

 

 

FUTABA T6KH 2.4GHz 8-Channel T-FHSS Heli Spec Radio System w/ R3001SB Receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)






  •  
  •  
  •  
  •  
  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01004374-3

$249.99

DLE-130cc Twin Gas Engine with Electric Ignition and Mufflers

DLE 130 Engine 

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
High performance in a compact package!

The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.


Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon


Specifications:

  • Displacement: 34.9 cc (2.13 cu in)
  • Bore: 1.5 in (38.5 mm)
  • Stroke: 1.17 in (35RA mm)
  • Weight: 2.6 lb (42oz)
  • RPM Range: 1,600-8,500
  • Output: 4.1 hp @ 8,500 rpm
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
  • Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
  • Suggested Break-in Prop: 18x6
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 7.6:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
  • Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller

 

 

RedwingRC Pre-Run
DLE 35ra DLE55
 

 

 

DLE-130

$949.00

Cross RC BC-8 Winch

Cross RC BC-8 Winch

Features:

  • Submarine Waterproof: HV 4.8-8.4V
  • Internal Steel Gears / All CNC Aluminum Casing
  • Anodized Color: REEFS GREY
  • Custom spool kit includes: 7075 LOWPRO CNC MACHINED SPOOL w/ Clear Finish
    • 5Ft Silicone Coated Steel Braided Line, w/ Scale Recovery Hook
  • BEC Not Required

Specifications:

  • Torque:
    • 280 oz/in at 6.0V 
    • 300 oz/in at 7.4V
    • 320 oz/in at 8.4V
  • Speed:
    • 0.07 sec at 6.0V
    • 0.06 sec at 7.4V
    • 0.057 sec at 8.4V
  • Voltage: 4.8 ~ 8.4 DC Volts
  • Spline: 25T

CZR97400569

$59.99