Ford F450 KG1 Edition 1/10 4WD RTR, Grey Titanium

Contact UsCustomer Reviews

Ford F450 KG1 Edition 1/10 4WD RTR, Grey Titanium

Our Price:

$399.99

Quantity (2)

Availability 2 in stock
Weight 7.50 lbs
SKU CEG8987

Ford F450 KG1 Edition 1/10 4WD RTR, Grey Titanium

CEN Racing official Licensed FORD F450 SD KG1 Wheel Edition 1/10 4WD RTR (Grey Titanium) Custom Truck DL-Series.

True 1/10 scale RTR. Body length 26.7 inch (678.18mm) true body scale truck.
Features:

  • KG1 FORGED Trident-D wheels. Front 35mm, Rear 31mm per wheel
  • REALISTIC textured bed linear coating
  • 90mm Aluminum pewter anodized shock housing
  • Black Anodized lower and upper links
  • RED anodized shock springs
  • ESC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather; Built-In Capacitor Module; Automatic throttle range calibration; Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery; Over-Heat protection and throttle signal loss protection; Easily programmed with jumpers
  • Motor-RS-550 high Torque Motor - Power by Mabuchi Motor
  • Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm; 6.0V 0.23 sec/60deg 12.0 kg-cm; 25T Horn Gear Spline
  • Radio System: Pistol-Grip AMP 30 3 Channel Transmitter; Digital Trimming; Steering Dual-Rate (ST D/R) Adjustment; End Point Adjustment (EPA); Built in Failsafe
  • Chassis: Steel Frame Rails; CMS (Chassis Mounted Servo) Chassis Design; Stamped Steel Shock Hoops; Steel Skid Plate; Full Precision Ball Bearing Support; Adjustable Turnbuckles; High Torque Servo Horn Safer
  • Suspension: 3 Links Suspension with Panhard Bar Design; Aluminum shock housing; Big Bore Oil Filled Adjustable Coil Over Shocks; Harden Steel Steering Drag Link; 6mm Aluminum Linkage; 90mm shock housing
  • Drivetrain: Sway bar included; 4 Wheel Drive; Center Shaft Drive Train for more power transferred to the wheels; Highly Efficient Transmission System; Wide Range Easy Changeable Gear Box Design; Sealed transmission eliminates dirt and dust; Sealed Axle housing; 5mm Hardened Steel Axle shaft; Differential Center Locker Front/Rear Planetary Gear Type; Metal Transmission Gears; Planetary Gear type Differential

Specifications:

  • Length: 26.70 inch (678.18mm)
  • Width: 11.41 inch (290mm)
  • Wheelbase: 17.60 inch (447mm)
  • Ground Clearance: 2.52 inch (64mm)
  • Weight: 2.51 lb (2.5kg)

Add the KAOS Aluminum Tow Hitch w/ 5.8mm Pivot Ball Bolt, Ford F450 SD for $29.99.

There are numerous parts that we can get for the F450. Send us an email at [email protected] for your request.


: *
: *
: *
 

MKS-X6 Metal 2" Servo Arm

MKS-X6 Metal 2" and 1.75" Servo Arm

This horn is for the 6mm 25 tooth Spline. 
HV777, HBL599, HBL575, HBL575SL, HV747, HV737, HV9767, HV1220-50, DS1220-50 

MKS-2025-1

$19.99

DE HAVILLAND TIGER MOTH SCALE 1:3,8 (Giant Wingspan 93" 2360mm)

DE HAVILLAND TIGER MOTH SCALE 1:3,8 (wingspan 93" 2360mm)

 

VP-Tiger Moth

$549.99

Power HD Mutli-Function Servo Program Box

Power HD Servo Program Box

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

Perfect for Giant Scale/3D planes and 1/5 Buggy/Crawler! So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!

Specs:

  • Torque:
    • 374.9 oz/in at 6V (27.0 kg/cm)
    • 444.4 oz/in at 7.4V (32.0 kg/cm)
       
  • Speed:
    • .14 sec at 6VV
    • .11 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

HD-PG-CB63

$39.99