Lemon RX DSMP 6-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Contact UsCustomer Reviews
  0  
  4. Lemon RX DSMP 6-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 6-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Ask a question about this product
Printable version

Share

Options

Our Price:

$19.99
Quantity (6)

Details

Availability 6 in stock
Weight 0.25 lbs
SKU LM-0080

Lemon RX DSMP 6-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Product Specification

Dimension and Weight: 42.0mm(L) x 23.1mm(W), 8.7g
Recommended voltage range: 3.5V to 8.5V (2S LiPo capable)
Technology: DSMP with GEN2 SDR stack (DSMX / DSM2 compatibility)

Highlight

DSMP 6-channel receiver is DSMX/DSM2 compatible that provides exceptional performance. 

Failsafe

Bind receiver and current channel values will be saved. Failsafe will be activated when no signal is received for 2 seconds. All channels will be positioned to failsafe default. For this reason, it is recommended that the throttle should be at 0% while all other sticks are centred during binding.

1S LiPo Application

The minimum recommended safe supply voltage is 3.5V

NOTE:

  • The battery must be capable of maintaining that voltage while delivering the required maximum load current to the receiver and servos. In some cases you MAY be able to operate at a lower voltage (for example a well discharged 1S LiPo cell) but you must test it in practice to be sure.


: *
: *
: *
 
HiTec 5645mg

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

  • Torque:
    • 143 oz/in at 4.8V (10.3 kg/cm)
    • 168 oz/in at 6V (12.1 kg/cm)
       
  • Speed:
    • .23 sec at 4.8V
    • .18 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.11oz (59.82g)
  • Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
     
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Gear Type: 3 Metal Gears and 1 Resin Metal Gear
  • Connector Wire Length: 11.81" (300mm)
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Dead Band Width: 8usec
  • Potentiometer Drive: Indirect Drive
  • Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
  • Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$45.99

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme)

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme)

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme) This is a set of 2 wings (left & Right) will need to be re-covered to match your scheme. Please contact us if you are in need of a single 50cc size wing.



Includes Silver Side Force Generators

50 Wing2

$90.00

Hurricane MK.1 420mm Micro PP War Plane BNF with DSMX/2 Receiver

Hurricane MK.1 420mm Micro PP War Plane BNF with DSMX/2 Receiver

Hurricane MK.1 420mm Micro PP War Plane PNP with DSMX/2 Receiver   

 

 

DW-E2802

$24.99


Back to Top