Lemon RX DSMP 7-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Contact UsCustomer Reviews

Lemon RX DSMP 7-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Our Price:

$21.99


Quantity (7)

Availability 7 in stock
Weight 0.25 lbs
SKU LM-0081

Lemon RX DSMP 7-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Product Specification

Dimension and Weight: 42.0mm(L) x 23.1mm(W), 9.5g
Recommended voltage range: 3.5V to 8.5V (2S LiPo capable)
Technology: DSMP with GEN2 SDR stack (DSMX / DSM2 compatibility)

Highlight

DSMP 7-channel receiver is DSMX/DSM2 compatible that provides superior performance with diversity antenna. 

Failsafe

Failsafe will be activated when the receiver has lost signal for more than 2 seconds. Failsafe can only get set when the unit has just been powered on within 60 seconds.

Activate all-channel failsafe:
- Power on the unit that is already bind to a transmitter with transmitter on
- Ensure green LED is off (failsafe is disabled prior to activation)
- Set the channel position required and stay still
- Press and hold the F button for 3 seconds until green LED is on.

Deactivate all-channel failsafe:
- Power on the unit
- Press and hold the F button for 3 seconds until green LED is off.

1S LiPo Application

The minimum recommended safe supply voltage is 3.5V

NOTE:

  • The battery must be capable of maintaining that voltage while delivering the required maximum load current to the receiver and servos. In some cases you MAY be able to operate at a lower voltage (for example a well discharged 1S LiPo cell) but you must test it in practice to be sure.


: *
: *
: *
 

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

  • Torque:
    • 143 oz/in at 4.8V (10.3 kg/cm)
    • 168 oz/in at 6V (12.1 kg/cm)
       
  • Speed:
    • .23 sec at 4.8V
    • .18 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.11oz (59.82g)
  • Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
     
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Gear Type: 3 Metal Gears and 1 Resin Metal Gear
  • Connector Wire Length: 11.81" (300mm)
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Dead Band Width: 8usec
  • Potentiometer Drive: Indirect Drive
  • Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
  • Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$45.99

EPP Edge 540 Extreme Sport 3D Airplane 43.3" (1100MM) Wingspan

EPP Edge 540 3D Airplane 43.3" (1100MM) Wingspan 

DW-E3704-EPP-Edge

$79.99

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft (New 2024)

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft 

DW-X01

$127.99