F4U Corsair Jolly Rogers Micro RTF Airplane with PASS (Pilot Assist Stability Software) System
F4U Corsair Jolly Rogers Micro RTF Airplane with PASS (Pilot Assist Stability Software) System The Rage RC Micro F4U Corsair Jolly Rogers is a classic WWII semi-scale park flyer with the stability needed for beginners to learn how to fly and the necessary power to provide a fun flying experience for RC enthusiasts. This F4U Corsair is manufactured from durable EPP foam and a detachable prop system adds to the durability by nearly eliminating broken props and bent motor shafts. Like most Rage RC airplanes, this one includes the PASS (Pilot Assist Stability Software) system which allows the performance envelope of the airplane to expand with your flying skills and makes flying this airplane a more enjoyable experience. In Full or Partial Assist Mode with PASS, if you ever lose control, simply release the control sticks and the airpalne will quickly return to level flight. Even when in Expert Mode, if you get into trouble, all you need to do is move the PASS switch to Full or Partial Assist for the system to take over and you're back in level, stable flight. Another option included with this airpalne is the removable snap-in-place landing gear that can be used for take-offs from smooth surfaces. When hand-launching is a better option, using Partial Assist makes it easy whether the gear is installed, or not. For added fun when flying with the PASS system, you can use the Stunt button on the transmitter to automatically enable the airpalne to complete either a loop or roll that will make you look like an ace pilot. Features:
Specifications:
|
![](https://www.redwingrc.com/images/D/rgra1301v2.jpg)
![](https://www.redwingrc.com/images/D/rgra1301v2_1.jpg)
![](https://www.redwingrc.com/images/D/rgra1301v2_2.jpg)
![](https://www.redwingrc.com/images/D/rgra1301v2_3.jpg)
![](https://www.redwingrc.com/images/D/rgra1301v2_4.jpg)
FUTABA 4PM 2.4GHz 4-Channel T-FHSS Radio System w/ R334SBS Receiver
FUTABA 4PM 2.4GHz 4-Channel T-FHSS Radio System w/ R334SBS Receiver
Product DescriptionWith 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.
Features
Standard Programming
* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions |
HRP-FUT01004387-3
$329.99
DU-BRO Tru-Spin Prop Balancer
Dubro Tru-Spin Prop Balancer
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
DUB499
$39.85
BMS-M57H Wing Servo, HV-Digital, Magnetic Sensor, Micro, High Torque, Metal Gear, 10.6KG/147.2oz 0.09sec @8.4v (Vertical Mount)
BMS-M57H Wing Servo, HV-Digital, Magnetic Sensor, Micro, High Torque, Metal Gear, 10.6KG/147.2oz 0.09sec @8.4v (Vertical Mount) |
BBR-BMS-M57H
$69.99