Beechcraft T-34 Mini 470mm Laser-Cut Balsa Wood Model Kit (Kit, PNP or BNF Electric Power version)
Beechcraft T-34 Mini 470mm Laser-Cut Balsa Wood Model Kit (Kit, PNP or BNF Electric Power version) The Beechcraft T-34 Mentor is an American propeller-driven, single-engined, military trainer aircraft derived from the Beechcraft Model 35 Bonanza.The earlier versions of the T-34, dating from around the late 1940s to the 1950s, were piston-engined. The T-34 was the brainchild of Walter Beech, who developed it as the Beechcraft Model 45 private venture at a time when there was no defense budget for a new trainer model. Beech hoped to sell it as an economical alternative to the North American T-6/SNJ Texan, then in use by all services of the U.S. military.. Our model captures the very essence of this early fighter aircraft. This Micro Balsa plane is built from balsa and hardwoods with all the parts beautifully laser cut that are extremely accurate allowing you to build the perfect model. This kit is easy to operate and suitable for beginners and the PNP comes with everything you need except your battery and RX/TX. BNF includes 2 batteries and charger plus DSMX Receiver! Features:
Specifications:
Optional Power System:
Kit Versions: K1301= KIT only K1302= KIT+Motor(1104 3700KV+1.5mm Prop Saver+5030 Prop+2.0 Pin 3P) K1304 (PNP)= KIT+Motor+ESC( 1S7A+2.0Pin 3P+Walkera Female 2P+1.25P 2pin)+Servo(1.7g*2) K1305 (PNP+)= K1304+2pcs*1S 100mAh Battery+USB Charger K1305-144 (BNF)= K1305+Mini Receiver RX144 (DSMX/2) Free shipping lower 48 USA only. Contact us at [email protected] for international shipping |
Fourtitude Single Tank Mounting Trays 20oz
| Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. |
FORA1120
$13.99
Miracle Brushless Smoke Pump
| New Miracle Brushless Smoke Pump
Description:Introducing the Red Miracle Brushless Motor Smoke Pump! These light weight pumps have a CNC processed 6061 case with a Japanese high speed oil seal. The brushless motor/ESC supply smooth transmission and helps avoid the possibility of a spark. Basic Set up:First connect the pump to the ESC, fuel filters, muffler and smoke tank (drawing included to help with this).Plug your radio connector into the switched channel (such as landing gear or flaps). Turn on radio, make sure switch is off (100% negative) for at least 5 seconds and turn on. If the pump pushes fluid toward the muffler, the set up is correct. If it tries to pump toward the tank, please change any two wires' connection of the three wires connect the brushless motor and ESC. Radio Set up:3. Non programmable Radios Use a switched channel to switch the Smoke pump on and off. Since there is no trim control on a switched channel, the flow rate is consistent. When the switch is on, flow will be at maximum. We can set the END POINT/ATV of radio switch channel to control the maximum flow rate so as to control the smoke density. 4. Programmable Radios Plug the smoke signal wire into a spare channel (such as the 8th channel). Set this channel program mixing the Throttle channel, then set a switch for programming mixing on/off to control smoke pump on/off. Adjust the END POINT/Travel of this channel to control smoke pump flow rate so as to control the smoke density. For more detailed information please see your radio manual.
Specifications:
|
MRC-K-028
$119.99
BMS-M57H Wing Servo, HV-Digital, Magnetic Sensor, Micro, High Torque, Metal Gear, 10.6KG/147.2oz 0.09sec @8.4v (Vertical Mount)
BMS-M57H Wing Servo, HV-Digital, Magnetic Sensor, Micro, High Torque, Metal Gear, 10.6KG/147.2oz 0.09sec @8.4v (Vertical Mount) |
BBR-BMS-M57H
$69.99
