Safe Parallel Charge Board for 2S JST-PH

Safe Micro Paraboard (Pico/MCPX)

Paraboard Parallel Charging Board for Lipo /Traxxas Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Description:
A great servo, even without the price considered, but at less than $18 a piece, these servos are an amazing value for your 50cc plane, or smaller. Our servos are "Factory Fresh" and we guarantee them upon arrival to be free of defect.



Specifications:

• Torque:
  • 215 oz/in at 4.8V (15.50 kg-cm)
  • 235 oz/in at 6V (17.00 kg-cm)
     
• Speed:
  • .16 sec at 4.8V
  • .14 sec at 6V
     
• Voltage: 4.8v to 6v
• Weight: 2.11 oz (60g)
• Size: 1.6 x .8 x 1.5 on (40.7 x 20.5 x 39.5 mm)
   
• Modulation: Analog
• Gear Type: Metal Geared

BAT-SAFE XL Lithium Battery Charging Box 

Description:

This flame retardant bag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage.

Just place your battery or batteries in the bag, route the charge wires through the vents at either side of the top flap, and close the flap. ***Please Note: The use of a LiPo Guard is intended to reduce damages in an accident and will not necessarily prevent damage to surrounding objects. Never charge batteries unattended and please follow all safe charging and storage practices.***

Dimensions:

• Small: 7.25"x 8.75"
• Large: 9"x11.5"

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)