The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.

Savox SV-0220 MGP, High Voltage Standard Digital Servo 0.13sec / 111.1oz @ 7.4V (CLONE)

Ask a question about this product

Printable version

Options

Our Price:

$40.99

Quantity (22)

Details


Availability	22 in stock
Weight	0.40 lbs
SKU	SAV-SV-0220MGP1
Manufacturer	Savox

Savox SV-0220 MGP, High Voltage Standard Digital Servo 0.13sec / 111.1oz @ 7.4V

The Savox SV-0220MG is a budget-friendly, metal-geared, digital standard servo capable of operating on high voltage.

"Plus" series servos feature Soft Start and Sanwa SSR compatibility.

*Replaces SAVSV0220MG*

Features:

Metal gear train ensures durability and longevity.
Capable of high voltage use.

Specifications:

Torque @ 6V - 6.5kg/90.3oz-in
Torque @ 7.4V - 8.0kg/111.1oz-in
Speed @ 6V - 0.16 sec/60 deg
Speed @ 7.4V - 0.13 sec/60 deg
Dimensions L x W x H (mm): 40.7 x 20.0 x 37.0
Weight: 59.0g

Lemon RX DSMP 7-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

Type:	DSMX Compatible Full Range Receiver
Number of Channel:	6
Modulation:	DSMX Compatible (Also DSM2 backward Compatible)
Band:	2.4 GHz
Dimension:	25(L) x 18(W) x 11(H) mm
Weight:	4.5 grams + 2.5 grams
Voltage Range:	3.45 - 8.4 V

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

Plug bind plug to the receiver.
Provide power to the unit. LED flashes quickly.
Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
Remove bind plug.

Setting Failsafe

Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
Ensure that transmitter and receiver are turned on.
Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
Set transmitter controls to the desired failsafe positions.
Press the side pushbutton to memorize failsafe settings.
Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
Remove bind plug.
Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.