BLS-100AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Dual wire to connect directly to RX) 102.9kg/1429.3oz .12sec @8.4V

Contact UsCustomer Reviews
  0  
  4. BLS-100AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Dual wire to connect directly to RX) 102.9kg/1429.3oz .12sec @8.4V
Tariff Information update
The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.
more offers

BLS-100AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Dual wire to connect directly to RX) 102.9kg/1429.3oz .12sec @8.4V

Ask a question about this product
Printable version

Share

Options

Our Price:

$199.99
Quantity (10)

Details

Availability 10 in stock
Weight 0.80 lbs
SKU BBR-BLS-100AWB-dual wire
Manufacturer Blue Bird

Special Order! This is a special order item and is subject to manufacturer availability. Please allow a minimum of up to 2 weeks for processing before items are shipped. No cancelations or returns are permitted.

BLS-100AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Dual wire to connect directly to RX) 102.9kg/1429.3oz .12sec @8.4V--one of Blue Bird's most powerful 1/4-1/5 scale Monster Truck/Crawler/Large Boat servo at over 1400oz!!

Water Proof IP67 (Ingress Protection Rating, 6=Dust Tight, 7=Immersion up to 1Mfor 30 min)

Application / Suitable
1/4、1/5th Scale Vehicles, such as Buggy ( Off-Road ), GT ( On-road ), Monster Truck, Rock Crawler & Large Boats, etc.

 

Specifications
Stall Torque At 6.6V 80.6 kg-cm / 1119.5 oz-in
Stall Torque At 7.4V 90.4 kg-cm / 1255.7 oz-in
Stall Torque At 8.4V 102.9 kg-cm / 1429.3 oz-in
No-load Speed At 6.6V 0.16 sec / 60°
No-load Speed At 7.4V 0.14 sec / 60°
No-load Speed At 8.4V 0.12 sec / 60°
Stall Current At 6.6V 11.7 Amp
Stall Current At 7.4V 13.5 Amp
Stall Current At 8.4V 15.4 Amp

 

Protection Mechanism
Soft Start Protection Soft start back to a neutral position.
Over Voltage Protection Over 9.0V drive the protection mode, and 8.7V return to normal mode.
Low Voltage Protection Lower than 5.8V, drive the protection mode, and 6.0V return to normal mode.
Locked Rotor Protection Stall in 3 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection When losing the transmitter signal, that servo will immediately be back to the neutral position and locked.

 

Power Supply
Operating Voltage Range 6.0V ~ 8.7V ( 2S Li-Fe / 2S Li-Poly HV )
Operating Temperature Range -20°C ~ +60°C ( -4°F ~ +140°F )

 

Control Specification
Control System Higher-order Algorithm of【STMicroelectronics】32-bit MCU
AD 12-bit Resolution ( 4096 Steps )
Frequency：Up to 400Hz & 1500us or 1520us
Frame Rate (Signal repeat rate) Under 1ms【Auto-adaptive with Futaba_UR/SR & Sanwa_SXR & KO_HCS Mode】
Dead Band Width 0.002ms ( Default：2us)

 

Mechanical Specifications
Ball Bearing Dual, Stronger Ball Bearings with 1 piece of oil seal.【NMB from Japan】
Gear Stainless Steel Output Gear With All Steel Gears
Motor High-Efficiency Brushless Motor
Outside Case Full Aluminum Alloy Case
Horn / Gear Spline 15 Teeth ( Universal Type )
Connected Cable Length 300 mm (11.81 in) [ TYU : Black w/ Gray & JST : Red w/ Black ]
Connected Housing Universal Connector [ Black ] + JST Connector [ Red ]
Ingress Protection Rating IP67 means: 6=Dust Tight / 7=Immersion up to 1 Meter depth of 30 minutes

 

Physical Specifications
Dimension (mm) 65.8 x 30 x 56.5 mm / 2.59 x 1.18 x 2.22 in
Weight (gram) 229.0 ± 1 grams / 8.08 oz W/O Cable
Product Picture / Dimension Sketch

 







: *
: *
: *
 
Muffler Extensions, Exhaust Tubes (Fits DLE and other engines)

Muffler Extensions, Exhaust Tubes (Fits DLE and other engines)

 

 

DLE Muffler Extensions

Description:

Choose from 5 sizes!

These extensions fit over the exhaust exits on your DLE muffler. Below are some size dimensions and the muffler that each will fit. It is still a good idea to measure the exits on your muffler.

FORMAT: LxW (width is inside diameter)

A: 63x15 mm : DLE 20RA

B: 64x17 mm : DLE 35RA/40

C: 78x20 mm : DLE 55RA

D: 96x25 mm : DLE 55, DLE 111, DLE 120

E: 121x31 mm : DLE 61, DLE 85

*Sold individually- if you have a twin engine, you will need two extensions

*Each Hose extension comes with a metal clamp to tightly secure it to the muffler.

 

DLParts-

$6.99

100-140cc Twin Canister Muffler (DLE111/120/130, EME120, DLA112/116)

100-140cc Twin Canister Muffler (DLE111/120/130, EME120, DLA112/116)

100-130cc Twin Canister Muffler (DLE111/120/130, EME120, DLA112/116)

 

 

 

D-CN-100-130

$189.99

Viton Tubing Fuel Tube 1 Meter 1/8" ID x 1/4" OD x 1/16" Wall For Gas Engine

Viton Tubing Fuel Tube 1 Meter 1/8" ID x 1/4" OD x 1/16" Wall For Gas Engine

Viton Fuel Tube/Tubing 1 Meter 1/8" ID x 1/4" OD x 1/16" Wall For Gas Engine 
Safe for Gasoline - sized for DLE engines and many others
3mm i.d. - 6mm o.d.
(also known as medium size - fits the DLE 20/30/55/111 and many other)

Sold in 1 meter (3ft) Sections. Please select how many Meters you want

Viton-Fuel Tube

$19.99


Back to Top