RedwingRC Accessories

Tariff Information update

The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.

more offers

Micro RX DSMX/DSM2 4CH with Telemetry

Ask a question about this product

Printable version

Options

Market Price: $39.99

Our Price:

$29.99

You Save

25%

Quantity (7)

Details


Availability	7 in stock
Weight	0.25 lbs
SKU	DW-RX144T

Micro RX DSMX/DSM2 4CH receiver 1.00 Pin Plug with Telemetry

This Micro RX is perfect for RWRC indoor EPP Profiles and light Aircraft where pilots are wanting to reduce weight. This is RWRC's lightest RX, weighing only 0.9g (including the antenna wire)!

Type:	DSMX Compatible Satellite Full Range Micro Receiver w Telemetry function
Modulation:	DSMX Compatible (Also DSM2 backward Compatible)
Band:	2.4 GHz
Dimension:	18.5(L) x 13(W) x 6.5(H) mm
Weight:	0.9 gram (including antenna wire)
Voltage Range	3.0-5.0V from Receiver

Servo Plug: 1.00Pin 3P

Supports exteranal brushed or brushless ESC
Supports 2S brushless ESC (BEC output 5v)
Automatically will match frequency (DSMX/2)
Support TELM function (Optional)

Auto Frequency Match: If the RX does not receive the signal after power on for 15 seconds, the RX will switch to "Auto Match Frequency" mode. The LED light on the RX will flash from slow to quick flashing, then complete binding procedures according to TX manual.

TELEM Function: Transmitters with TELEM function can receive real time battery voltage, RX voltage, RX signal intensity and RX temperature data from the aircraft. (If you require RPM of motor or altitude data, recommend choosing a more advanced RX like our Lemon RXs with Telementry)

ESC Locking Function: This safety feature prevents accidental motor start-up when the receiver is powered on and throttle stick is on. After powering on the RX keep the TX throttle stick off for at least 2 seconds. The RX LED will turn off for 2 seconds, then turn on indicating the ESC locking is off and normal throttle engaged.

Note:

This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.

Product is tested to be compatible with Spektrum's DSMX and or DSM2 product (Spketrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).

DLE 55cc Engine

+ Free Shipping (Continental US only!) If international customer, please contact us at [email protected] for shipping quote. You will be charged separately for shipping.

Description:
The DLE 55 is a tried and true engine in the 50cc class size. It is the best bang for the buck, and offers great reliability, power and weight ratio. Comes with all high quality components, includes all hardware (standoffs, ignition, muffler, spark plug, etc). The DLE 55cc is a perfect choice for our 50cc class airframes

Download DLE 55cc Mounting Template
Download DLE 55cc Manual

Specifications:

Displacement: 55.6 cc (3.392 cu in)Manifold: 4-petal, V-type, reed-valve, bottom induction
Bore: 1.77 in (45 mm)
Stroke: 1.38 X in (35 mm)
Weight: 3.6 lb (1.65 g)
RPM Range: 1,350-8,500
Output: 5.5 hp @ 7,500 rpm
Requires: unleaded gasoline, oil, ignition battery & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & mounting template
Suggested Propellers: 23x8, 24x8
Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
Compression Ratio: 7.6:1
Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
Weights (Individual): Engine: 47.6 oz (1,350 g); Exhaust: 3.5 oz (100 g); Ignition: 4.2 oz (120 g)
Recommended Propeller: Redwing 23x8, 24X8. 23x8 is a nice mix of 3d and sport. The 24x8 is more 3d

Features:

Two crankshaft bearings-simple design for lighter weight
Aluminum alloy crankcase
Four petal V-type reed valve bottom induction system
Walbro carburetor
Fully automatic electronic ignition
Two year limited warranty through Hobby Services beginning at date of purchase
INCLUDES: Engine, spark plug, standoffs, ignition, muffler, instruction manual

DLE-55

$429.00 429.00

Redwing RC Aluminum Servo Circle Arms

Description: DID YOU GET COOL ALUMINUM OR CARBON FIBER ARMS WITH YOUR KIT, BUT DON'T WANT TO USE THE PLASTIC CIRCLE ARMS THAT COME WITH YOUR SERVOS? FINALLY! THE SOLUTION IS HERE!!

Now made to fit Hitec, OR XQpower/Futaba/PowerHD

Made to line up with Redwing, Goldwing, and MOST other ARFS that include servo arms. The holes pre drilled are threaded for a 2mm bolt, so that you do NOT have to use a nut on the bottom. Just a little loc tite on the servo arm threads, and tighten. YOUR DONE!

Not sure if it's the best thing since sliced bread, but it's close!

1 circle $4.99
5 = $19.95
10= $38.90

RW-Circle-Arm

$4.99 4.99

SmartDesign V3 "Trouble Free" Tail Wheel Assembly

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

Features: